Fully right ! If your Domoticz doesn't send any command to your Danalock, when all is setup (when you paired it) wait a few seconds, click on the small hole on the Danalock, just wait the it stops to be flashing green and then it works .

Hello
Any help on these FGS 224 ?
Rgds
Sam

Hello Bill,

No I did received today two FGS-223 until someone add the configuration file in OpenZwave.

If someone could kindly create the config files it would help

Thanks in advance !
Sam

Hello !
Any support on this please ? So annoying not to be able to install these new Fibaro Relays...

Hello everyone, Just bought two new Fibaro Smart Relay FGS 224 and they are not recognized in Domoticz (Hardware then OpenZWave). The FGS 224 is the first double relay working in 24v on top of 110-230v which is practical in some cases. Can I just copy the FGS 223 files in the manufacturer folder of ...

Here is how I fixed it! Thanks to this forum. I was able to pair it easily but then it was not doing any action... I have Raspberry with Zwave.me UZB (USB) stick with Domoticz Firmware 0.14.6 on Danalock V3 I did a secure pairing with Domoticz and that part went well. Use the app Danalock under ...

Hello, THREE REQUESTS and ONE BUG for the developpers from a big user of Domoticz and Domoticz App 2.0 (paid) I am using Domoticz for 2 years with more than 100 devices plugged on it (Z-Wave, RFCOMM, NFC...) One bug , on Android 7.0 (Samsung S8), the sever setting is different between WiFi and 3G/4G ...

Thanks to all your feedbacks ! I have to read more about dzvents. My standard scripts are now working well again so move to dzvents is unecessary work even if I am getting curious. For people who face the same issue, in order to avoid to take the previous lastupdate script (top right in Domoticz ...

Thanks for asking. It runs all the time (all in Domoticz). When door open, light still off, light off for more than x minutes, it switch light on. -> This works well. When light on for more than 5 minutes, no "indoor" presence, it switch off the light. -> My issue ! When I come home, open the door ...

Hi Danny, thanks for your reply ! Let me post an example of my script and would be grateful if you could explain me on how to avoid such misleading output. commandArray = {} function timedifference (s) year = string.sub(s, 1, 4) month = string.sub(s, 6, 7) day = string.sub(s, 9, 10) hour = string ...

I checked once more and beleive there is really a bug :-(. When I push the "lumierentree", the system give me the last update BEFORE the activation. You can see it on the blue lines. See below: 2017-10-22 09:05:53.735 dzVents: 2017-10-22 01:31:10 2017-10-22 09:05:53.749 (OpenZWave) Light/Switch ...

Raspberry PI 3 updated Zwave-me key Domoticz last stable update v3.8153 Hello, I just face an issue which I am pretty sure wasn't here some months ago. When I do lua script, I put a time difference that when something is "on" for more than 5 minutes, it turns off. The issue is that the script runs ...

Hello, I have the full version with different settings when I am on wifi versus when I am on 3g/4g. However, when I get home, I have already Domoticz open on my Android and when the phone get the wifi, nothing works. I need to kill the app and when I relaunch it, it works without a problem. Can you ...

NFC repeats action - should have a limitation integrated Hello, I use NFC with Domoticz when I come home and avoid using keys etc... Very practical ! However, it happens frequently that NFC tag is read twice and door opens and then locks again... Can you integrate something that when NFC is used ...

Hello, I have added Darksky in Domoticz and it gives me rain and wind etc which is great. What I don't get is that it gives a "forecast" so when in the future is this ? Can we not "adjust" how far we want to go ? Intent is to say, if it rains tomorrow, no need to water the garden OR if it rains in ...

Here is my LUA Code for Sunscreen. I have an Oregon weather system (WNR88) so you need to modifiy it accordingly if you are using another source. --Wind Extract wind = otherdevices_svalues['Wind_Home'] a = string.sub(wind,1,string.find(wind,';',1,true)-1) b = string.sub(wind,string.find(wind,';',1 ...

Hello! I am planning to buy a Samsung Gear S3 which is running on Tizen OS and not Android Wear. I didn't check but I would imagine that the Gear S3 is by far the most sold Smartwatch around, I imagine that the Domoticz Team is working on the Tizen OS ? This would be really fantastic! Thanks in ...

Hello everyone, It is my second FGS222 which I need to reset because suddenly only one switch is working. It is really supprising that it still works on one Switch. Any idea on how to fix this ? I am all updated on Raspberry with Domoticz. I have attached a screenshot of what shows OpenZWave. Thanks ...

Hello everyone, Could someone give me a quick hint on this issue ? I have my own weatherstation connected on the Web. I can pull an XML file providing all the values. However, when I extract the values from the XML, they are strings and not value. When I convert the string "17.3" with tonumber, it ...

Hello dhanjel,

Thanks for the idea. I have just done that and it works very well

It would be still VERY cool to get it directly via Domoticz in the "Events" page.

Thanks anyway !
Rgds
Sam