@yugoos The log does not tell me what the problem is. Did you uninstall the old domoticz or did you update? I think you should uninstall the old. I'm not familiar with ser2net, do you need some special drivers for this device? Regards Jumbotroll Hi Jumbotroll, I managed to install the package using ...

I did uninstall the old version, i even doublechecked the removal from /var/packages after uninstall. Could another package be causing trouble? Ser2net is a popular and simple tool to share a serial port on a tcp port over the network/internet, if the serialport is available on the host no aditional ...

DS214 use arch-armadaxp Have you tried to manually download domoticz_armadaxp-5.2_2.0.3502-7.spk http://jadahl.dscloud.me/sspks/packages/domoticz_armadaxp-5.2_2.0.3502-7.spk No one else has reported problem with armadaxp packages. Regards Jumbotroll thanx for the quick reply. unfortunately this one ...

@Jumbotroll I have DS214 (no plus) and can't install your packages, i tried all armada variants but it should be armada-xp. all i get is a error-message: "this package is not supported on this platform" my current DSM version: 5.2-5592 Update 4 synocommunity version installed ok.. am i doing ...

Can someone with a deeper insight in Domoticz say if "warm white" and maybe even saturation would be possible with Domoticz? I had the plan to buy some more of these RGB bulbs for the living room. But the cold white that Domoticz give me with these devices won't pass the WAF-test (woman acceptance ...

Nothing was changed in my sketches and things were running fine for weeks, but after updating beta (cant remember the version, i think it was the first version with power/energy choise) powerpulsecounter values were devided by thousand and written in the database that way, this was the only change ...

This is stated in the code (in the remarks) You need the latest domoticz beta as there have been many changes to the mysensors implementation lately I missed that line, sorry. I am running a beta release for mysensors stuff so i can use rgb switches...i am however a bit hesitant to upgrade to ...

Together with 'Ad' we made this sketch, it uses the FastLed library thanx for sharing. Small remark...Fastled is not bundled with mysensors, it needs to be downloaded and installed separately. Does this work on current Domoticz-stable (2.2563), i tested after Theo's comment and no message is sent ...

at the moment the Philips hue and applamp are using hue, zwave mysensors use RGB(W) i'm open for suggestions, maybe someone has a nicer html5 color picker? In my opinion I think the colorpicker is fine, it just needs to send saturation and brightness values to json, this way you can stay compatible ...

Hi Theo, You're right about the repeater function not affecting domoticz, in fact...domoticz should not even be aware of repeaters or any routing table. As far as i know this should work fine with stable release of domoticz but as soon as i get me new arduino's i'll test again. If you are willing to ...

33 MySensorsGW 00000302 1 RGBW Light Lighting Limitless/Applamp RGBW Off 12 100 This is what I see on my devices tab. When I go over to the the switch panel, it's presented as an On/Off device. I added a S_LIGHT to the sketch and Reading your post again i must have overlooked this part, does the S ...

And I see another difference. You are using a newer version of Domoticz. I have the latest stable one. This might be the explanation. I think I just have to wait until the next stable release will be available. I had serious problems with the latest beta release last week. The GUI stalled after a ...

No thanx, do you see a color-picker on the edit page for your switch? what happens if you change the type to dimmer, Domoticz version should not be the problem, what version mysensors are you running? if you check debug log (both sensor and gateway) it should report a message type at presentation to ...

@Yugoos I tried your example. But I receive a "Error Sending Switch command" when I try to turn on the strip from within Domoticz. In the Log i See the error message 2015-09-25 18:58:15.825 Error: MySensors: Light command received for unknown node_id: 0 Do you have any Idea with might be wrong?? Hi ...

I vote for it as HSB model is used without the B, and it limits a lot support for Imperihome interface HSB model is fine when calculated correctly using all 3 base values (Hue, Saturation and Brightness). As far as i can tell only Hue is used for RGB, Brightness is sent as separate dimmer parameter ...

one major rgb improvement i would like to see is sending full RGB values to milight/zwave/mysensors/etc devices. the current code calculates RGB values based on hue value (found in main/helper (hue2rgb)), this gives us about 360 different colors instead of the 65K possible... the above suggested ...

Nice, thanks for sharing! But isn't a WS2812 ledstrip a bit expensive for this? If i understand correctly you set the whole strip to the same color. Isn't a 'normal' RGB-strip strip with only three channels (R, G, B) that you drive with 3x MOSFET or so easier/cheaper? Moved to MySensors subforum ...

you could device the full white with the brightness, you should/could also do this for the color (both have to be done in the sketch) Getting different white values (eg. Color temperatures) cannot be done with brightness levels alone, hardcoding temperatures using brightness would mean i can never ...

Hi, for anyone interested in using ledstrips controlled by domoticz, i made the following sketch.. // Example sketch showing how to control an RGB Led Strip. // This example will not remember the last rgb color set after power failure. #include <MySensor.h> #include <SPI.h> #include "Adafruit ...