The issue is solved :D

yesterday I cleaned the browser cache with no effect, however, this morning I tried to access Domoticz again and finally i got the classic black background screen of Domoticz, but it was not empty: it contained few information and I could access the system.
I can't saythat ...

Hello,

with a Raspberry Pi3, I have used Domoticz for a few years, then I started an update without worrying about updating Raspbian as a priority and Domoticz no longer worked.
After vainly trying to recover the situation with a 2018 backup, I decided to start from scratch: on a new SD I installed ...

I'm sorry, I'm not expert and hope that other people will help you

Claudio

phalseb,

as wrote above, I am not expert, I just reported what I did with a big help of a frend!

Regarding your problem, have you tried to set the port to 8080 instead of 8888?

Claudio

Thanks to the help of woody4165 I successfully started the Domoticz app for Android :D

For the benefit of other non-expert users like me, I report what I learned:

1) There is no relationship between Mydomoticz (activated by the Domoticz web application) and the Domoticz app for Android.

2) In ...

Thanks to the help of woody4165 I successfully started the Domoticz app for Android :D

For the benefit of other non-expert users like me, I report what I learned:

1) There is no relationship between Mydomoticz (activated by the Domoticz web application) and the Domoticz app for Android.

2) In ...

Hallo,

maybe I understood the reason for the missing connection of the mobile A5 phone on which I installed the App for Android:
it may be the fact that I should first enable the MyDomoticz service, as reported here https://www.domoticz.com/wiki/MyDomoticz

Is it true?

Claudio

Brutus,

this is my problem, as reported above:

I installed the lite version into my A5 phone and I'm not able to start it: the application stops the connection procedure with advice "No route to host".

Claudio

Brutus,

unfortunately I do not think is a refresh issue, but a connection one.

Claudio

Ciao :)

I'm yet using Domoticz and few minutes ago I tryed the App for Android.
I installed the lite version into my A5 phone and I'm not able to start it: the application stops the connection procedure with advice "No route to host".
where have I mistaken?
I inserted same IP address used with my ...

Did you boot your pi after expanding filesystem ? It will be expanded after next reboot, that you have propably done allready few times, check again :) If not, i presume you allready have whole card in use ?

I have rebooted my RPi3 several times and Gparted see the SD card still not expanded ...

Totze, thank you, the installation was successful and I got the RaZberry Setup in Blue :D

I inform you that I have encountered a possible error in your guide that I've solved as follows.

In your post, your command to install Domoticz is sudo curl -L install.domoticz.com
I run it and the system ...

Please disregard my previuos posts on file config.txt issue,

I confused the config.txt file with the cmdline.txt.

Sorry.

Now I will arrange things and will take up the installation

Claudio

Here you can see a video of a fresh Domoticz / Razberry installation ;-)
http://www.domoticz.com/forum/viewtopic.php?p=118235#p118041
Thanks mlamie,

I saw few video and did'nt find help to understand why my config.txt is so different from that expected.

Can you send the text of your actual ...

Hi totze ,

I started the work of a new installation and I found that file nano /boot/config.txt does not contain wording "console=serial0,115200" as you wrote.

Hereunder the code of my file # For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt ...

Thank yuo PeGe for you comment.

After trying so many things, i recommend to start from the scratch and write new sd-card, after that, here is detailed guide ...

Thank yuo totze .

Your guide appears detailed enough for me and I think I can follow it. If I will find any problem, I will ask for ...

Thanks mlamie e PeGe ,

for your posts.

The PeGe solution seemed reasonable and I wanted to try it, unfortunately without success.

Here's the code I used (I noticed several "Created symlink from / etc ...." but I can not say that it is the desired outcome to my commands):
pi@raspberrypi:~ $ sudo ...

I did spend also quite some time to get it running and I updated the Domoticz wiki page based on my experiences.

What I did start again from scratch. See also a blog post with all the steps.

http://mysmarthomeathome.blogspot.com/2016/12/domoticz-installation-on-raspberry-pi-3.html

Thanks for ...

Thanks tontze :)

You are right for the issue: absence of hardware Motherboard! I have created it with name Motherboard Rpi3 and Domoticz created 5 devices!

Now, please, let us return to the images of post # 1
1) https://s5.postimg.org/uf9gpm6dj/20170129a.png
2) https://s5.postimg.org/hlbew9sxz ...

Hi !

I followed Jonas´s guide from other topic, it does work. Vesternets guide is outdated with Rpi3..

missing

That did it for me. Including node instructions might be valid in vesternets guide.

-T

PS. Motherboard in the vesternets screenshot, you can add rapsberrys own motheboard sensors ...