Did you find anything yet? Hi Danny, It's still happening... 2016-06-06 03:40:03.465 Error: EventSystem: in /home/pi/domoticz/scripts/lua/script_device_main.lua: /home/pi/domoticz/scripts/lua/dzVents/Domoticz.lua:445: attempt to index local 'device' (a nil value) 2016-06-06 05:25:02.595 Error ...

Danny, I get some error logs since the change to the dev version: 2016-06-02 22:55:02.040 Error: EventSystem: in /home/pi/domoticz/scripts/lua/script_device_main.lua: /home/pi/domoticz/scripts/lua/dzVents/Domoticz.lua:444: attempt to index local 'device' (a nil value) 2016-06-03 03:20:01.251 Error ...

Be aware though that the timedOut value is as recent as the http update interval as set in the dzVents_settings file. I've set mine to 5 mins as i found that the updating of the default 30 mins caused to big a delay. Hopefully in the near future we can have Domoticz provide that information ...

If you switch to the dev branch then you can check it out: Added support for setting the setpoint for opentherm gateway. Added timedOut boolean attribute to devices. Requires http data fetching to be enabled. Let me know if it works then I'll make a release. Danny... I checked both You're the best ...

Sure but what does it mean? It means that the device can't be reached because it is out of power. (Hardware powered off) Do you know the lua command to read the value of HaveTimeout ? I've managed to use your .updateSetPoint(setPoint, mode, until) in my scripts by changing Device.lua in th dzVents ...

Could you show me the actual json command? It shouldn't be too hard to add support for it. Sure, here is the command: json.htm?type=command&param=udevice&idx=69&nvalue=0&svalue=$newpoint (http://domoticz_ip_address:8080/json.htm?type=command&param=udevice&idx=69&nvalue=0&svalue=$newpoint) Where IDX ...

Could you show me the actual json command? It shouldn't be too hard to add support for it. Sure, here is the command: json.htm?type=command&param=udevice&idx=69&nvalue=0&svalue=$newpoint (http://domoticz_ip_address:8080/json.htm?type=command&param=udevice&idx=69&nvalue=0&svalue=$newpoint) Where IDX ...

APPLAUSE!!!! :D :lol: :D :lol: 8-) 8-) This is the greatest addon to Domoticz for a long time.... It makes LUA scripting soo much easier! Thank you for all your hard work Danny! Examples i've created today: -- Script for controlling the light sensitivity of my Foscam IP cam (FW8904) -- Snapshots are ...

Hi All! Thank you for all the work you have been doing! 8-) It resulted in a great frontpage for my Domoticz system. I've been following this forum for quiet some time now... Time to give something back! As I am the owner of an OpenTherm Gateway, just like jkimmel and floris74, I wanted to be able ...

Hi All! Thank you for all the work you have been doing! It resulted in a great frontpage for my Domoticz system. I've been following this forum for quiet some time now... Time to give something back! As I am the owner of an OpenTherm Gateway, just like jkimmel and floris74, I wanted to be able to ...