No, not really. I want to have the system booting from M2 device. That means the system must have an M2 bootloader and then take it from there. I haven't found anything about booting from M2. I think it should be well possible to boot a M2 bootloader from internal flash and then continue boot from ...

Now I've got the Urve Board Pi. Looks real good. First thing is to boot it in normal mode without anything about Domoticz. One more positive thing about this board is the RTC and backup battery. That's good things to have in a home control system.

Even if it doesn't boot natively from the SATA device, it shouldn't really be impossible to solve. A small bootloader on SD card that loads the real boot image from the M2 card. After the boot, the SD card won't be used any more and the system will go full speed against the SATA device with no ...

I'm considering an Urve Board Pi (https://urveboard.com/) as base for a Domoticz installation. It has onboard M2 SATA interface and would thereby get rid of the SD card and problems with that. Does somebody have any thoughts about this?

Could be you updated your system some time ago, and just rebooted, and now facing this issue Do you mean that the problem was really inserted with the update and then showed up on reboot? Then no, I don't think so. The RPi was rebooted several times between last update and when it went sour. Thanx ...

Updated Raspian. Still error code on boot. This feels like something with Raspian, not Domoticz or Zigate. The error code comes when booting the RPi and mentions overlay that was changed to turn off Bluetooth according to Wiki guide. I can't see how this could have anything to do with Zigate ...

Now I've got even more problems. I took the RPi down clean to check what version of Zigate I really have. Took out the Zigate board and it says Ver 1.2. When I start up the RPi again, it says "failed to load overlay pi3 = disable-bt" and very low screen resolution. It has never done that before ...

Of cource you can't, but I cant find any log file. What should I do to get a log file?

Now I've assured I have the latest plugin version by running the update procedure at #12 in the installation instructions. Still can't access the plugin web page at port 9440.

I cant find that file. Neither can "Locate". What's the complete path to it?

I have found "~/domoticz/plugins/Domoticz-Zigbee/Logs" but there is no "PluginZigbee-xx.log" file there. Do I have to enable it in some way?

Thanx. Ok. It has changed since the instruction was written. Maybe that instruction should also be changed then. Now, I've probably succeeded emptying the old pairing list with the coordinator initialization. Then put it in pairing mode. Do you mean that should be done thru the plugin dasboard? I ...

The "enable_uart=1" line in config solved the serial problem. Now I can add the Zigate hardware and it pops up in the hardware list. Next to do is to start paring with "Permit join time" and clear old pairings with "Erase Persistent Data: True". But I can't find those settings. Where do I find them?

Thankyou very much. There is one line I havn't seen before. It's the "enable_uart=1" line which seems to have something to do with my problem. I'll check into it a bit more.

I remember now there was a problem that might have to do with this. 9. Set the accessability of the serial adapter to ‘No’ using raspi-config option P6 (Interfacing options / serial): In my installation there is no P6 option. The 'P' options only go to 4. And since this has to do with serial I bel ...

Thanx, Walter! :-) That helped a lot for wiringpi. Strange that the Wiki doesn't say anything about that. Now I have another problem. When I choose serial port in the plugin settings, I can't choose serial 0 as it should be according to the Wiki installation description. The console for serial 0 is ...

My installation went corrupt and I decided to start over from the beginning with updated components. I installed 2022-09-22-raspios-bullseye-armhf.img.xy and got it starting up nice with Domoticz installation. But now the problem start. I can't find the Zigate instructions I had used for my earlier ...

Aha! That I hadn't seen. No I have no switch device. I will read some more about this and maybe I can understand a little bit more. Thankyou very much so far.

RPi with Zigate plugin board right now.

I have some IKEA Trådfri buttons that I want to control my blockly event with. Let's say a simple set/reset function with two buttons in different places. One button to start and one button to stop. I use a simple outlet controlled by two buttons. What should I use in the blockley button input? If I ...