I would like to replace my P1 wired connection to wireless too. Could you tell me what hardware you are using? There are several options (homewizard P1; smartgateways, JMD). Your solution is exactly what I want to achieve. It would help me to select the best option.


Typical huh? You help ...

I'm using the Domoticz API by means of curl "https://<address>:<port>/json.htm?type=command&... etc.

Works just fine, but I would like to surpress the messages that come with that in the Log (Status).
Funny things is, I only see messages posted there when param=switchlight. Any other param sofar ...

Thanks again for all your help!

gas_stroom.jpg

So, as I'm using docker, I decided to backup the system first. Then I removed all volumes relating to www from my docker compose file.
Next I retried your pull / up -d / prune command. And now I see (to my surprise I must say) ALL panels again, perfectly filled with recent and ...

networks:
default:
driver: bridge
ipam:
driver: default
monitoring:

services:
domoticz:
image: domoticz/domoticz:2024.7
container_name: domoticz
restart: unless-stopped
devices:
- /dev/serial/by-id/usb-RFXCOM_RFXtrx433XL_DO3RW0UN-if00-port0:/dev/serial/by-id/usb-RFXCOM_RFXtrx433XL ...

Just by means of excluding I also tested by installing Safari browser on my primary laptop and by opening the page on a laptop that never used Domoticz before. Both panes are still there.

So the /opt/domoticz/www folder in docker is mounted on my local filesystem, so be removing the counter-month ...

I've stated the following in my docker compose yml:
image: domoticz/domoticz:2024.7

I ran the command and the restarted instance still shows the empty panels.

Also went inside the container to check the CounterLog.html file. It apparently DOES contain the month- and year-charts.

root ...

I'm actually running Domoticz from a docker container, not sure how to implement these commands?
And wouldn't I initiate an upgrade to latest beta-version iso stable?

I deleted ALL browser cache, cookies, etc now. Still two empty panes showing no data available in the Power log screen.

Thanks for the reminder. Didn't miss it. Checked my browser settings (reckoning this is what you meant) and deleted complete cache.
Also tried changing Domoticz to stable version. No difference visible.

{
"CostEnergy" : 2149,
"CostEnergyR1" : 800,
"CostEnergyR2" : 800,
"CostEnergyT2" : 2149,
"CostGas" : 6218,
"CostWater" : 16473,
"Divider" : 1000.0,
"DividerEnergy" : 1000.0,
"DividerWater" : 100.0,
"P1_Tariff" : "High",
"ValueQuantity" : "",
"ValueUnits" : "",
"counter" : "5247.769 ...

Ok, just checked if there was any data in the report page. Exported the csv's of the missing panels. They only show a header line, no actual data there.
Did the same thing for Gas, they do show data.
Now went to the database and looked at the tables you mentioned. My Power utility has DeviceId 21 ...

Thanks, tried the CTRL+F5 and incognito browser. No effect, still same two panes showing "no data available".
Also tried other browsers, same picture. I reckon the data would be stored in the domoticz.db. In what table are they stored? Can I check there for more detail?

I'm using Domoticz beta 2024.7 (build 16325). My Log-view panels for power do display the usage data "usage last three days" and "usage last week", as well as for the "comparing usage", but I'm getting a "no data to display" on the panels "usage last month" and "usage last year".
What is wrong here ...

Thank you so much FireWizard. Works like a charm, didn't know this feature. All historic data is visible now under the old id's and the new devices are gone (but not the data it already collected). I'm happy!

I recently replaced my P1 Smartmeter connection to measure and display power and gas consumption in Domoticz from wired to wireless.
Domoticz created new devices (with new deviceid's) in the GUI which show the desired power and gas measurements.
All working and nice, but ... I would like to keep ...

This is what my Popp Z-rain runs with for over a year now........
The first field you can ignore, you start with zero, you don't have to do anything with it, does not matter.

Your wake-up interval seems a bit high, nice for battery life, but it is not so good for knowing if the Z-rain is asleep ...

I bought a Popp Z-Rain Rain Gauge and added it to my Domoticz instance.
Can somebody tell me what values are reasonable to use as settings in Domoticz for this gauge, because using default values currently does not generate any signal or measurement when its raining. Despite the information under ...

galadril wrote: Wednesday 04 November 2020 11:43 ...
Thanks... Sorry for the inconvenience caused
...

shit happens, thanks for the update.

sammyke007 wrote: Wednesday 04 November 2020 11:04 Galadril (dev) on github:

New build is coming with version: 553 (0.2.256 (8148))
Please let me know asap if this fixes the issue...

Please wait for the update to be available in the Play store.

will do