Just answering myself, it could be of any help for others. I solved the problem by using Mosquitto ACL-file. I enabled both anonymous access and the password file. For the systems that I want not to include all devices I use a username/password combination. In the ACL-file I only allow the discovery ...

I have a few zwave devices on my main domoticz system that i want also to be available on a slave domoticz system. They need to be controlled and status readable on both instances. Before I migrated to ZwaveJS2MQTT I used OWZ with a master-slave setup. I migrated to ZwaveJS2MQTT with MQTT ...

I know the 5-button remote can be added to the group. You can put it in a group together with ZiGate to just catch the push-events. My question actualy is: Why this can be done with the 5-button remote and not with the 2 button remote. Is there a reason not to allow this? (This thread gave me the ...

I did pair with zigate and the bulbs.. I want to include them in the groups too, just like i can with the 5 button remote. Reason is that the plugin detects activity and the devices dissapear in this view: health.PNG I did this with the five button remotes (see image down 'Remote woonkamer') and ...

Hi, On channel 25 I have 11 routers and 16 end-devices, a mix from Tradfri, Hue and Xiaomi On channel 26 I have 12 routers and 8 end-devices, also a mix from the above 3 brands I upgraded today to the latest stable 4.7.006 because I couldn't add the 'Tradfri on/off switches' to a group. Because it's ...

Is this the reason the Tradfri ON/OFF E1743 can't be added to a Zigate group anymore?

Unexplainable.... One Zigate is on channel 25 and used to have dropped-out devices with nack everyday (during the last 2 weeks), so i had to powercycle 1 or 2 of them every day. On february 29th I downgraded my other Zigate to 3.1a and setup a new network on channel 26 (my old channel 11 zigbee is ...

Did yesterday a downgrade on my other Zigate to 3.1a and setup a new network on Channel 26. Further moved my wifi back to channel 1 so there should be the least possible interference.

So far my devices survived the night.. I'll wait and keep you informed.

Hi Walter, I'm still experiencing the same issues as you do. First I had more as 40 devices on my network, so I ordered an extra Zigate. I made sure there is least possible interference with WiFi, I even disabled 2.4 GHz for a day with no noticable effect. Wifi scan with my Unifi AP's shows clean ...

I don't think it is a good idea to have channel 11 and channel 25. What is the Wifi 2.4 channel ? If Wifi is on Wifi 2.4 channel 11, I would use Zigbee channel 11 and 12. That would be more than enought. Wifi channel is temporary on channel 6. I did this because I want my new Zigbee networks on ...

There must be something wrong with this NACK thing... I can't imagine nobody else has any problem with this. I ordered a new ZiGate Wifi last week because i had more as 40 devices, so I wanted to split my network in 2 segments. Beside of that, I wanted to clean up my domoticz so installed a new ...

Pipiche, If I buy an extra Zigate and split my network in 2 channels, can I migrate devices from the first to the second network and preserve the devices in domoticz? If migration is possible, should I just bind the device to the new network and the plugin re-establishes the link with the existing ...

Hi Pipiche, 40 is then the maximum directly attached to the ZiGate right? I remember indirectly the Zigate could address about 70 devices. Is this correct? Otherwise i'm over the maximum already. Firmware 3.0b states: "Up to 80 devices. 50 ZiGate's children and 30 others devices linked to routers ...

I still have my device that causes NACK. :( I don't want to go through the trouble of resetting and rebinding 48 devices at the moment. My Tradfri bulb has to wait, luckily the energy consumption of the light bulbs isn't too big. Can it have something to do with the amount of devices? I remember a ...

I have the same issue with just one tradfri bulb, just after i restarted the zigate plugin when upgraded from 4.7.1 to 4.7.3 stable. WiFi channel is 13 and zigbee 11, so they are as far apart as they can. Already tried to pair again, repairing works, but controlling the bulb gives NACK. 2020-02-17 ...

Ok, thanks.. One last question. I understand the Coordiator automatically selects the most silent network channel. Is there a way to force a change to a new channel. I would like to move my network channel to channel 15. I can think of only configuring channels 11,15... But how to initiate the ...

Great! My network is online again, thank you for helping me out. Reports started working again, still strange to me that interference can hold up report generation. Is there a way to migrate zigbee to another channel? I would like to try channel 15 because it has no overlapping WiFi channels. Maybe ...

after the latest loggings: 2019-11-27 00:51:23.724 Error: (Zigate) APS Failure , Command: 0x0100:Read Attribute request for Light Kitchencloset (Light Kitchencloset,0988,000b57fffecb5b2c) not correctly transmited. ( d4, NWK - [d4] Unicast frame does not have a route available but it is buffered for ...

I still got the APS messages, so in addition to changing the WiFi to channel 13 I set the zigbee channel to 15 in the zigate-dashboard as this is a non-overlapping channel with Wifi. After setting the channel to 15 and restarting I still saw: Status: (Zigate) channel set to 15 Network state UP ...

Thank you for your assistance! Wifi channel is set to 1, for zigbee I have the channel set to 0 (auto select). In the logs of domoticz I see channel 11 is used for zigate. Is zigbee only using 1 channel or is it using multiple channels side-by-side because I see in the old energy report chart the ...