Hi,

I have changed my setup and must reverse it first before testing This will take some time.

Regards,

The way I read it is that there is a maximum duration. So it should be possible to change it. Quote: Duration of using warning can be shorter than max_duration but not longer. If max_duration are set to 60 seconds, and you try to set warning with duration of 90 seconds, the warning will only apply ...

Merci bien!
I will give it a try this weekend.

Found this, perhaps it is of use:
https://www.zigbee2mqtt.io/devices/SMSZ ... -smszb-120

Hi there, I was able to get MQTT auto discovery working and it works very good! Perhaps one issue with Frient smoke detector /Develco SMSZB-120: Using the Zigbee2mqtt dashboard I am able to turn the alarm function on and off. Domoticz creates a switch for this alarm. If I turn this switch on, the ...

correction: at 13h today the voltage started to report correctly. Apparently the voltage is not frequently updated.

Bonjour Pipiche, Thanks for the patch, just tested it and I am afraid it doesn't seem to work: 1. stopped Domoticz: sudo systemctl stop domoticz 2. moved to: ~/domoticz/plugins/Domoticz-Zigbee 3. git fetch 4. git checkout pipiche38/device/Develco/SMSZB-1204 5. git pull 6. git status: "on branch ...

This is the detector:

https://frient.dk/products/intelligent-smoke-alarm/

And the zigbee interface is:
https://www.sonoff.be/a-69235043/zigbee ... escription

Hi

My setup is:

Raspberry Pi
Domoticz 2022.1 (build 14315)
Zigbee for domoticz plug-in (ZiGate)
Zigbee interface: Sonoff 3.0 USB plus dongle
Smoke detector: Frient SMSZB-120.

Bonjour Pipiche! Here is what I did: 1. Removed the three ZiGate devices from Domoticz (using Setup->Devices->Remove device from used devices and deleted the device. The devices no longer appear in the Domoticz device list now 2. In the ZiGate dashboard, the device status is now listed as Removed 3 ...

Hi, Here is the additional info: ZigBeeforDomoticZ plugin Admin Interface reports Version 6.1.003 The logfile, after holding the button for 6+ seconds is attached. The Plugin RAW Devices (Json) is below. Thanks! Martin [{"Status":"","RIA":"10","PowerSource":"Main","ZDeviceName":"Zigbee Coordinator ...

Hi all, hope you can help me out with the following: I have Domoticz installed on an RP. It has a sonoff zigbee 3.0 usb dongle plus. Installed ZiGate/Zigbee for Domoticz according to the instructions and I was able to pair a Friend smoke detector (Develco SMSZB-120). This Zigbee device appears as ...

Hi there, I would like to use two old iPhones (4 and 4s) as IP cameras and have snapshots sent on events. There are plenty of apps in the app store. The free ones do not seem to work with Domoticz (no live stream and or no snapshot). Are there any paid- or free- IP cam apps verified to work with ...

Got it working, turns out that I was using the wrong RFLINK device (I have two at different frequencies). One last issue though, hope someone can help me: I have paired two somphy blinds and added them to domoticz. I am able to control both blinds, so far so good. But for one blind, the domoticz ...

I have a similar problem, not able to pair the blinds. Used the instructions step by step found at https://matdomotique.wordpress.com/2016/04/21/domoticz-rflink-et-somfy/. Btw I am using an rflink at the correct somphy frequency. Here is what I do: 1 I put the screen into programming mode using the ...

Hi there,

Anyone succeeded getting a Hamulight working icw Domoticz?
If not, some pointers on how to get it working would be appreciated

Thanks,