Hello,

found problem - electricity meter is changed now and it is working.

Is it possible to edit value first day usage is :


Counter 4503.860

Usage 2165.040

u

Hello, as i wrote in first post- it was working for 5 years now without problems... Electricity meter was not changed and it is: Iskra ME382 / MT382 (DSMR 2.2) (Dutch standard) Telegram: /ISk5\2MT381-1006 0-0:96.1.1() 1-0:1.8.1(031769.19*kWh) 1-0:1.8.2(032524.15*kWh) 1-0:2.8.2(000000.00*kWh) 1-0:2.8 ...

Hello,

tested 1-4 MBUS with user variable- P1GasMeterChannel.

Still the same.

Old value in telegram.


I also deleted device Gas - after restart it shows automatic - unused devices with old meter value.

How to test if MBUS is working...
U

Hello, smart meter is Iskra MT381 and gas Landis+Gyr. It was working for 5 years now... Gas company changed gas meter for same type Iskra MT381 was not changed. Value that i get in domoticz and telegram is old value read from Iskra MT381... I think gas meter is not sending data to Iskra MT381... I ...

/ISk5\2MT381-1006 0-0:96.1.1() 1-0:1.8.1(031738.40*kWh) 1-0:1.8.2(032478.83*kWh) 1-0:2.8.2(000000.00*kWh) 1-0:2.8.1(000004.19*kWh) 0-0:96.14.0(0001) 1-0:1.7.0(001.254*kW) 1-0:2.7.0(000.000*kW) 0-0:17.0.0(015.300*kW) 0-0:96.3.10(1) 0-0:96.13.1() 0-0:96.13.0() 0-1:96.1.0 ...

Hello, gas company changed gas meter with new one- same type. I have Domoticz 2021.1 Rpi with USB connected smart meter and gas meter MBUS. Till now everything worked. I deleted old gas usage but device keeps showing and it shows old value. I tryed to force MBUS channel 1-4 with user variable. 2021 ...

Hello,

is this still working for new models with WIFI ? New API ?

This looks nice for lawn mower...
https://www.npmjs.com/package/iobroker.worx

U

waaren wrote: ↑Friday 28 June 2019 10:06

skorc11 wrote: ↑Friday 28 June 2019 7:40 is it possible that Domoticz reads values from ST cloud.
I have AC that is cloud connected and i would control it with Domoticz.

Yes. Via node red or direct using API calls.

Have you done that ? I would like to controll AC with domoticz. Any suggestions how to do it with API calls..

Hello,

is it possible that Domoticz reads values from ST cloud.

I have AC that is cloud connected and i would control it with Domoticz.

U

Hello,

stefanbode is still working on FW.. I will post when it is done. Till now manual control with MQTT position is working perfect.
U

Hello, tasmota FW with StefanB patch is now working- based on svalue- slider is ok. "idx":156,"nvalue":0," svalue":"56" ,"Battery":58,"RSSI":5 But NVALUE is always 0. it should be 0,2,1. nValue 0 and sValue 0 ==>> Closed nValue 2 and sValue 2-99 ==>> partially opened nValue 1 and sValue 100 ...

Hello, i have dual R2 with tasmota FW- stefanbode patch. Shutters are working and now i would like to send MQTT commands . I created blinds percentage device . Default Domoticz command : 10:02:12 MQT: stat/sonoff_dual_R2/RESULT = {"Command":"Unknown"} 10:02:45 Shutter unknown 10:02:45 MQT: stat ...