You're welcome and glad it helped. No plans for Github, I am far from a developer, a tinker is all. Would be a good project for someone to take on.

Hi @Xenomes Thank you for working on this plugin. I have recently acquired an Inkbird ITC-308-WIFI temperature controller. It reports temperature and allows the switching of heating and cooling based on a set point. I am using it for a Marine Fish Tank. Below is a dump from your debug_discovery. The ...

Bingo, now it shows up in the configuration tool with the wifi/CPL extender.

Edit : sorry I’m such a retard, totally forgot i had to add the hardware from the menu...

Is it working for you in Domoticz now?

Nothing else needed and config tools (and plugin) can see the Intesisbox once the Intesisbox is connected to your WiFi. It needs to be connected to an AirCon unit of course. You need to go through the Intesisbox setup to connect Intesisbox to to WiFi, which is what I think you mean by AP mode. Then ...

If the Intesisbox wmp config tool cannot connect to the intesisbox then there isn't much I can help with. I recommend contacting their support. The plugin will not work unless the config tool can connect as they use the same WMP protocol. When I open the IBOX-WMP-CONFIG application I get a spinner ...

Hi @DrMacabre, If you are using an Intesis WMP-1 device then you will not require an Intestishome login or account. The Intesis Gateway WiFi (ASCII) Interface unit piggy backs off the wiring from a controller and connects directly to your WiFi network. The gateway was called Intesisbox but looks to ...

Hi, I am trying to change from Basic Auth to Login Page and I cannot login when I start Domoticz with -webroot. It works fine using Login Page only, when using the default (no weboot). I have tried resetting the password using: sudo ./domoticz -nowwwpwd or resetpwd file I have tried clearing caches ...

I re-linked mine okay but it is a bit of a pain because there were many devices.

Same - woke up this morning to a bunch of Google Home notifications saying that all my Controlicz devices are unlinked. Went to Google Home App and Controlicz is unlinked.

Hi @kitopopo,

My plugin will not work with your IntesisHome which works via their cloud service. My plugin is for IntesisBox which is for direct IP control.

The post by @xavierlp is where you need to start.

Regards,
CV8R

You're welcome. I'm glad my tinkering has helped someone else! Re the Fan, I did start looking at setting the devices off when the unit was off but ran into problems with the setting the selector off and remembering the status of the selector. In the end I decided it wasn't worth the complexity and ...

Hi, here is my plugin. I'm sure its not pretty but it works! Copy it into a folder in your plugins directory, restart domoticz and see how you go. # Basic Python Plugin Example # # Author: GizMoCuz # """ <plugin key="BasePlug" name="IntesisBox WMP-1 Protocol" author="CV8R" version="0.0.9 ...

Hi @galinette, Thank you for your plugin! I set it up today and everything went reasonably smooth apart from a caching issue in Mosquito causing me grief when i deleted some of the added lamp devices in Domoticz. Deleted lamps kept re-appearing, deleting them in Domoticz and the Mosquitto cache ...

Hi All, I am in no way a programmer but took the risk and bought a IntesisBox PA-RC2-WMP-1 which is matched to my Panasonic whole home inverter in the hope of getting a plugin working and learning something along the way. The PA-AC-RC2-WMP-1 uses the WMP protocol and I am sure the WMP protocol is ...

Thanks for the info @CV8R. I agree the errors are annoying when the device is switched off. I'll see if something can be done about that in a few weeks when I have my hands on the HS110 again. Cheers Andrew. Apologies, I wasn't subscribed to the thread. Sorted now. @Geitje the timeout won't help ...

Hi @ajay100 I have been using your script with great success although I found that the addition of the heartbeat status update was spamming the domoticz switch log every heartbeat. I added a var to track the status and only send status on heartbeat if diff from last status. I can share, but my ...

Hi All, Really like the look and feel of the theme but kept getting the messed up presentation of the page per post on Page 1 by landaisbenj » Tuesday 10 July 2018 16:52. Cache clear, local store etc didn't fix it. I use Linux on x64 not Pi and run Domoticz with a modified webroot (for reverse ...

Mmmm I have seen that before, maybe some absolute path url on the code that messes things up behind a proxy? The problem persists on the local network when not accessing via the proxy. Do you run with machinon master or beta? Domoticz master or beta? Hi DewGew, Apologies for the tardy response, I ...

Mmmm I have seen that before, maybe some absolute path url on the code that messes things up behind a proxy?

The problem persists on the local network when not accessing via the proxy.

Hi All, Really like the look and feel of the theme but kept getting the messed up presentation of the page per post on Page 1 by landaisbenj » Tuesday 10 July 2018 16:52. Cache clear, local store etc didn't fix it. I use Linux on x64 not Pi and run Domoticz with a modified webroot (for reverse proxy) ...