The nodes became alive after pressing the tamper button on each of the nodes. very strange behavior.

Since tonight all wave devices suddenly report OpenZWave: Received Node Dead notification from HomeID. All seems fine until 2 minutes after reboot when the devices report dead starting from the lowest NodeID. Nothing was changes to the configuration. I've tried several soft reset, reboots and ...

The sketch is the one include in 1.5.

Pin 5 and 6 are unused with me. See attached picture.

The issue is fixed. After replacing a, apparently, broken wire to the sensor, the values are nicely reported and new devices are added in Domoticz.

There is the log from the serial monitor: send: 2-2-0-0 s=255,c=0,t=17,pt=0,l=5,sg=0,st=ok:1.5.1 send: 2-2-0-0 s=255,c=3,t=6,pt=1,l=1,sg=0,st=ok:0 read: 0-0-2 s=255,c=3,t=6,pt=0,l=1,sg=0:M sensor started, id=2, parent=0, distance=1 send: 2-2-0-0 s=255,c=3,t=11,pt=0,l=8,sg=0,st=ok:Humidity send: 2-2 ...

I've got a Serial Gateway up and running and added my first node. I can see three different childs (Hum, Temp and Arduino_node) on this node but the new devices are not be added automatically. 'Accept new hardware' is enabled. I've also pushed the button to accept new devices for 5 minutes, before ...

Hi Marmo, Thank you for sharing this. I've also been trying for long to get functionality like this working. The play and pause script work perfectly. The ultimate goals is to get the TTS working. Unfortunately I run into some issues that I can't get solved: 1. When starting my test script I get the ...