ben53252642 wrote: ↑Tuesday 20 November 2018 18:44 The missing file in your case of re-installing Domoticz would have been located in the Config folder and start with:

zwcfg

You will see some letters / numbers after it which is your Z-Wave home ID.

Thanks,

re-included the plugs, will include zwave config to the dackup from now on

The 0x000 means Domoticz doesn't know what kind of Z-Wave device is sending (or receiving) the data. It may partially work or not at all. Over time (about 12 hours) any hard wired devices should self populate the ID and Type fields, battery operated devices will need to be re-included manually (it ...

As for your hard to get to Fibaro, try this and see if it populates the ID and Type fields Go here: http://domoticzip/ozwcp/cp.html Click the Z-Wave node, then in the "Select an Operation" dropbox choose "Refresh Node Info" then click "Go". Wait a minute then check Domoticz, if your lucky it will ...

I use Domoticz with a ZWave.me stick A while ago I had to do a re-install of domoticz, all my Zwave nodes are switchable but the measuring of kWh etc does not work anymore. I also see that ID and Type are both set to 0x000 and manufacturer is also empty. Is there a way to learn the powerplugs ...

I have a IR panel in the bathroom that I controll with domoticz.
It switches on at 6 in the morning only when we are home (looks for phones) and if temperature is <19, it switches on and off untill 7:30 and then switches off.

IKEA-tradfri COAP-adaptor version 0.6 started (command line)! Connected from IPv4Address(type='TCP', host='127.0.0.1', port=52704) Data received: b'{"identity": "domoticz", "gateway": "192.168.1.136", "action": "setConfig", "pollinterval": "30", "groups": "False", "psk ...

Hi, I am allready busy for 2 days to get this working. Everything seems ok, but there is something strange going on. In the domoticz log I see: 2018-08-21 10:04:21.915 Error: (Tradfri) ----> Line 280 in '/home/pi/domoticz/plugins/IKEA-Tradfri/plugin.py, function onMessage 2018-08-21 10:04:21.915 ...

Is there someone who has this plugin working in domoticz on Synology Nas?
I have tried but am missing to many things, maybe someone could help?

Following, very interested.
Saw your solution a while ago, that was very clever.

Will this work reliably? The typical fear with this implementation is that the unit will cycle between cooling and heating due to the big difference between measured and true temperature (because the sensor is inside the unit). What I think will happen is that the unit will switch from heating to ...

Nuki now discounted:
http://domoticz.com/forum/viewtopic.php?f=30&t=14815

Hi there. App is still formidable, spoking about security, this app still need to "open to the big bad world" our home (port fwd). Is there a chance that this will have a compatibility with MyDomoticz Proxy ? That would be a great addition, any plans to implement this? Would be a nice addition for ...

Do you have the lua scripts installed?

If you have Daikin Aircon, there is already a script for Domoticz and Daikin integration.

You are supposed to use the buttons, script is not designed to be run from the command prompt, it misses parameters.
Try the buttons.

Yep, you probably copy and pasted from windows into putty?
Download notepad++ paste the sripts into that and then ftp the scripts over to the pi.
That will work.

It's the same thing ppc9 had.

The script is run every 15 minutes vian crontab */15 * * * * /home/pi/domoticz/scripts/upcheck.sh & So there is 15 minutes waiting time before trying again. If Domotiz crashes on 127.0.0.1 (the loopback adress) it will automagicaly reboot itself. In the last few lines on the bottom, just before fi ...

Thanks, i can understand that script hehe. The logic of that script is similar to what i had in my head to build. Would it work if i change the external URL to some webpage like http://www.google.nl ? Yes, that should work, I check my domoticz because that is what I need to be up and running. If ...

I am doing the same, checking every 15 minutes via cron with my bash script: offcourse you need to put your public ip or url in the first line and change the IDX (139 in this script) of the switch to your own switch IDX outsideURL="http://outside.url:8080" insideURL="http://127.0.0.1:8080" date if ...

Hello all, made a little change to the script so now you can use cooling too. How it works: Just the same as the old script, but the script now checks: If room temp is lower then the programmed temperature then heat, if room temp is higher then programmed temperature then cool. Works with the 2 ...