So it's basically impossible to get this running as long as Telldus doesn't update their libraries for newer OS versions?

I have searched the Internet and found some information, and these instructions you mention are some of them, but most are outdated. However, I can't seem to find what I need to get my Tellstick Duo up and running. It seems that I don't have enough knowledge to solve this, so I hope someone will ...

No, I didn't, and I don't know how to do it.
I don't really understand what/how you mean with (See CMakeList.txt).

I have really tried to find information on the internet about how to install the latest version of Domotics on a Raspberry Pi, but a lot of it is old (e.g., from 2016) information ...

Thanks for Your quick answer.

The Python-problem is solved, right now. (Installed 3.11)

But I have still problem with my "Telldus Core"
I can´t find any info on how to add telldus-core.

Hello again

I have now started from scratch on a new SD card.
1. Installed Raspberry Pi OS Debian Bookworm without desktop.
2. Installed Domoticz
3. Added Tellstick in Setup/Hardware
4. Connected Tellstick Duo to my Raspberry Pi 3 B
5. After reboot, these error messages appear in the Log
Status ...

Installed Domoticz 2025.2 in Docker on a Raspberry Pi with Debian Bookworm and can access it via the browser, but cannot get the connected Tellstick Duo to, for example, report temperature values to Domoticz.

Under "Setup-Hardware" in Domoticz I have selected Tellstick and it is enabled.
Under ...

Hi
I have a working Domoticz with Raspian 8.0(jessie) on a RPi 3
Have the RPi cable-connected to my network.
Now I want to connect by WiFi, but when I run "sudo raspi-config", there is no Network-option. (if I try a clean Linux install, then I have Network to choose)
I would really appreciate if ...

Hi
I hope someone can help me with this problem.

I got this :
pi@domoticz:~$ ls /sys/bus/w1/devices/
10-0008013ef41c 28-000005a0dfc4 w1_bus_master1

In Domoticz I have added 1wire

The 2 sensors doesn´t show up in Domoticz.

The logs tells that
2017-06-05 09:38:05.563 Error: 1-Wire system : error ...

Yes, it is.
I click on Red button "Allow for 5 Minutes" but still no sensors.

Hi
I have a RPi2, Tellstick Duo and a "Remote temp sensor"
I have done all the installation (Domoticz SD-card image domoticz-raspberrypi-sdcard-4834.img )
Run apt-get update and upgrade.
Installed Tellstick, by instruction of itslav(blogg.itslav.nu/?p=875)
Have added Tellstick in Domoticz. Setup ...