Hi Kniazio, There are no seperate rules needed in the esp anymore. A made a device entry in the ESP firmware. the name of the device is Communication - OTGW When selected you can add all the corresponding domoticz IDX ID's where the parsed data has to go to. The LUA script in domoticz to change the ...

Hi Lokonli, This is the status code from the headers tab; Request URL: http://192.168.1.150:8082/vendor/dashticz/ical/?time=1596653783730&maxitems=10&history=0&url=https://p57-caldav.icloud.com/published/2/MTI2MDA5MDE0MTEyNjAwOUm9ISY_"and the rest from the url" Request Method: GET Status Code: 200 ...

Hi there, i hope this is in the right topic, not my intention to offend anyone. I just did the beta auto installation on a raspberry. Everything works as it should be. The only thing that i do not get going is the calendar feature. I am using the i.cloud calandar but it keeps giving me an error code ...

The IDX numbers are the numbers off the switch you want to see in domoticz. So if you want to have the room temperature from your CV, you add a virtual temperature sensor in domoticz. This sensor has a IDX number. Put this number at IDXroomtemp. The nodemcu wil monitor the output from the ...

Update; I found out how to interface with domoticz using JSON. After a few hours i found out how to get all the relevant data from domoticz and also send dat to domoticz. I now can switch on and off lights just by clicking on the 3d floorplan. I also can show all the room temperatures is the 3d ...

A small update, Indeed the file is big,but once its completely opened it now runs smooth. Also on my ipad. I removed all the light calculations, this was a bit too much for my ipad. It is much more responsive now. Als clicking on and off the lights responds better. next step is connectiong the ...

I use domoticz for some years now, mainly for automating light curtains and temperature. When i want to manipulate lights or temperature i gat my tablet and do the adjustments. I am playing with the idea of mounting a screen somewhere in the house so that you can monitor and switch some lights. I ...

Hi Carma,

I posted a link to the ino file in my previous post. I beleive it is still working.

I am using the rooms option to place al sensors, switches and setpoints together. Instead of a room i give it the name off the process that they are used for.
It’s a bit of a work around but at this moment there is no other option.

Bart

Hi,

I just found this solution. I think this is just what you are looking for. I am currently using the OTGW but this looks very interesting.
http://ihormelnyk.com/opentherm_thermostat

Bart

Hey all, I happen to have the infamous OTGW from NODO-shop, all works well, otmonitor etc.. I can send commands via the hardware tab; CS=x works fine and the boiler starts up. Ps=1 updates most of the values. The problem is with the control setpoint device in the temp tab, if I edit that value it ...

It has been a while since the last update. I did a little tweak on the firmware. All temperatures in domotica have one digit after the comma so i removed the second digit from the opentherm gateway. I also made a new firmware based on the last ESP8266 firmware (2019 6 30) Heres the link https ...

Hi Naqua,

heres a link to the ino file. I am a noob with programming so there should be enough left to optimise. Great to hear that this plugin is useful to you.

https://drive.google.com/file/d/1wG4zKO ... sp=sharing

Hi Maikel, here's the link to the gateway i bought; https://www.kiwi-electronics.nl/opentherm-gateway-kit. Its the standard gateway. I bought a standard wemos D1 esp to get it connected by wifi. The plugin i made was a desperate action te get the OTGW working without any connection losses. Ive been ...

I do not know the nodo board. The firmware is made for the wemos D1 4mb 8266. I have had some buffer full errors when I use the logging in the esp. setting the weblog level on info is enough info to see everything is working. Even better to turn logging off. What i do is just let it do it’s thing w ...

Nice to hear that you like te solution. I am using it for a week now without any problems.
I updated the file in the link that I gave before.
I finally can change my temperature remote and also the graphs are looking nice without the zero values that I had before.

I just did some extra programming and made a new bin file. Most important changes; added some extra sensors removed the rules option (you now do not need to enable rules) cleaned up the code a bit Th following sensors are available; room temp room set point DHW temperature (hot water) Boiler water ...

That was the biggest headace for me but i finally figured it out. Just make a virtual Setpoint device and make u lua script to send the setpoint temperature to the esp. I beleive this can also be done with python and DzVents watever you like. i actually made two scripts, one for the tempsetpoint and ...

I think I might have found something. For some strange reason you have to enable rules. Don’t now why becouse I do not use any rules. If I disable them nothing works

I only changed the GPIO-0 becouse it resets the opentherm gateway at reboot. No other settings than default