I'm trying to make a blocky, and it works but not the way i wanted. I have made two, which should do the same; The one that works: working.PNG Here are all switches seperate as you can see. But what i want is working with groups: not-working.PNG This should do the same as the first picture, but when ...

I also have a remeha boiler (dont know the exact model) and a honeywell round wireless modulation thermostat. I can confirm that setting the temporary setpoint (TT command) is not working all of the time (mostly not) I try to get domoticz to sent a TC command (Constant temprature) to see if this ...

I have the same thermostat and it is working. So your problem is something else. haha thats quite an easy answer :P Mine is working, sometimes. Most of the time it is not working. Which can be explaind by viewing: http://www.domoticaforum.eu/viewtopic.php?f=75&t=10541 because the creator of the ...

I have a Remeha Calenta Avanta Boiler and a Honeywell Round Wireless Modulation Y87RF2008 Thermostat I have installed the latest firmware (4.2.5) on the OTGW using the Open Therm Monitor. I can change the water temprature of my Central Heating and that of the normal hot water. I can read all data ...

I have the same thermostat and it is working. So your problem is something else. haha thats quite an easy answer :P Mine is working, sometimes. Most of the time it is not working. Which can be explaind by viewing: http://www.domoticaforum.eu/viewtopic.php?f=75&t=10541 because the creator of the ...

Any news about this?

The app works great good job! Except for the temperature graphs, these are not very well to read when the temprature is around 0 degrees. For example yesterday the temprature was 0.3degrees, when i zoom in the graph it goes to 0 and 1, but not 0.0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0 So ...

Hi, In the current version Domoticz is using the OpenTherm command TT ( Temperature, Temporary - Temporarily change the thermostat setpoint. The thermostat program will resume at the next programmed setpoint change. Values between 0.0 and 30.0 are allowed. A value of 0 indicates no remote override ...

Hello, I'm using the OTGW with Domoticz, is it possible with Domoticz to send a constant temperature to the thermostat? Greetings, Piacco +1 And the option to set TT (temp. temporary) or TC (temp. constant) on the thermostat :) +1 for the TC option. As you can read above my thermostat requires it.

What kind of command is send to the OpenTherm Gateway when i change the thermostat setpoint? [...] 'TT' is used, see: https://github.com/contactless/domoticz/blob/master/hardware/OTGWSerial.cpp#L191 (Serial connected OTGW) https://github.com/contactless/domoticz/blob/master/hardware/OTGWTCP.cpp ...

What kind of command is send to the OpenTherm Gateway when i change the thermostat setpoint? As far i can see there are two options: TT=temperature Temperature, Temporary - Temporarily change the thermostat setpoint. The thermostat program will resume at the next programmed setpoint change. Values ...

if you call the json requests locally, why dont you add 127.0.0.1 to the local networks, or any other ip address that calls it ? The problem is that i dont only run it locally, i also plan to run them from my phone (NFC tags) with mobile network. we are currently busy with other implementations ...

Hello all, I dont know if this is discussed before (cant find any with search) but i wonder the following: If you want to switch things through a JSON request (like: http://<username:password@>domoticz-ip<:port>/json.htm?api-call) it works fine, and i understand that you need to use a password. But ...

in the latest beta support for the status bits is added, you will receive them as lights/switches. About the modulation level, unfortunately i do not receive them, maybe Remeha does not support it. Are they supported by your CV? Can you see them in the monitor utility? This looks to be working fine ...

i see only the option to set this for the LED's .... maybe i missed it.. is it in the status field? Where? I also saw it for LED's but i thought when you can turn on/off an LED the OTGW also must be able to report that the LED is turned on/off also if you dont have LED's attached, but i can be ...

Is it also possible to implement the following things in Domoticz OpenTherm-Gateway functionality? - Flame status icon (like: green = on, Red = off or something like that) - Possibility to see if the status of the boiler is in Hot Water or Central Heating mode? - Error status of boiler (like: green ...

Yes, but how/where to enter the setpoint values. I do like the way the iSense is doing it... Create a schedule program, for example 'Normal', or 'Holiday', Edit the schedule Monday 07:00 Temp=20 10:00 Temp=15 17:30 Temp=20 22:00 Temp=15 Tuesday .... Then you need to activate one of the schedule ...