Hi waaren,
Solved starting Domotixz after a reboot by adding Domoticz to the Windows Common Startup folder.

Now working well.

Thanks for your input.

Hi waaren,
Many thanks for the reply.

Followed your guidance and have 4.9700 running with all my switches/scenes restored from a backup, and can edit as required.

However, it will not work if I install Domoticz as 'Run As A Service'.

Any Ideas?

1) In Windows 10 ,I uninstalled a working v.8153, reboot, then installed 4.9700 no problem, selecting 'Run as a Service. Then restored my Domoticz database from a backup, and cleared the browser cache (Chrome). Reboot Windows. Result - No switches or scenes. 2) Did same again, but without selecting ...

Hi freijn, I have used HA Bridge successfully - a bit fiddly, but works well.

I then converted to Controlicz, really simple, secure and works brilliantly.

Good support from Nick. I definitely recommend Controlicz.

Eventually got Windows 10 - Domoticz working with Alexa, via HA Bridge.

Lights, Switches, Roller Blinds, Groups & Scenes all work well and the response is rapid, 2-3 seconds.

I found HA Bridge much simpler than OpenHAB.

Hi ftsikogi, With a little help from friends I got it sorted by initiating the native SSL via the command line on my start icon (Windows does not use 'domoticz.sh') I added: -www 8080 -sslwww 443 -loglevel=0 -sslcert "C:\Program Files (x86)\Domoticz\server_cert.pem" it worked immediately. e.g. it ...

Hi ftslkogl, I am struggling to setup SSL on Domotics / Windows 10. HTTP works well, now want to add the default certificate, initially. All of the web posts refer to 'domoticz.sh' file to setup the config, but I cannot find it in my installation folders! Are you able to give me any pointers? Thanks ...

Hi Hyper,
Did you get this working? I am having the same issue with my fan. RFX com works the fan O.K., but no 'Fan' in the device type dropdown.

Hi Hyper,
Did you get this working? I am having the same issue with my fan. RFX com works the fan O.K., but no 'Fan' in the device type dropdown.

Hi Westinghouse ceiling fan working via RFXManager. via RFXtrx433_Ext2_1020.hex firmware I am trying to create a switch for the dashboard, but the TYPE dropdown does not have FAN or WESTINGHOUSE in the list. RFXCOM attached to Domoticz, SETUP has ACCEPT NEW HARDWARE DEVICES checked. I am sure I have ...

Still having issues: Normal login: C:\Program Files (x86)\Domoticz\domoticz.exe" -www 8080 -sslwww 443 I tried to add a certificate file: "C:\Program Files (x86)\Domoticz\domoticz.exe" -www 8080 -sslwww 443 -sslcert file_path C:\Program Files (x86)\Domoticz\server_cert.pem Does not work ! Any ideas ...

I have basic remote access working via a pc & my iPhone. I am struggling setting up SSL. I have port 443 configures in Domoticz and my router. When I try HTTPS access using: https://XX.XX.XX.XX:8080, I get the error: XX.XX.XX.XX sent an invalid response ERR_SSL_PROTOCOL_ERROR I am unclear on SSL ...

Hi all, With router port forwarding configured, my setup works well, remotely, with no Website Protection 'Basic-Auth' username/password configured. I use http://xxx.xxx.xxx.xxxx:8080 on my iPhone / MacAir with Safari and access the dashboard O.K. with all switches etc working well. Plus,I can use ...

Hi Tony, Thanks for the reply, really useful. The sensor is to monitor the temperature of my Marine Fisk Tank (Coral Reef) and to provide alarms/notifications when the parameters get too high/low. I have a z-stick and have today ordered the FIBARO universal temp module and the DS18B20 Waterproof ...

I am looking for a sensor to measure the water temperature in a tank that can be connected via my RFXcom. Looking at many sensors on the web I find that they are room/external/weather sensors without a waterproof probe to go into a tank. Has anyone got a working example or can recommend a sensor? My ...

Hi, I have Domoticz working on my Win 10 Pc - no issues re lights and window blinds, scenes and hand held remote controls. I recently bought the Amazon Echo and have been looking across the web for examples of how to connect this to my Domoticz setup. The examples I have found seem to centre on RPi ...

So far it is ignoring the Off command. I will work on it over the weekend.

I have found that the hand held controller for my Brennensthul sockets, is recognised by the RFXCom transceiver, using mode 'Lighting 4'. Managed to get it to successfully interact with one socket, so far.... - I identified button A from the remote. Then added it as a new device. - Made this device ...

Thanks, I'll give it a try.

PS. I am using:
RFXtrx433E
Transceiver type = 433.92MHz
Firmware version = 1002
Firmware Type = Ext2
Transmit power = 10dBm
Hardware version = 1.3