Page 1 of 1
Action Impuls (klik aan / klik uit clone)
Posted: Tuesday 12 January 2016 14:45
by WilcoE
Hi,
It's now a couple of weeks that i'm running a RFLink gateway on my Domoticz server.
Alot of 433mhz devices are working good, only my Action Impuls (klik aan / klik uit clones) are not working.
i think this is because i dont understand how to set the dipswitches on the receivers.
Can someone post a example?
Re: Action Impuls (klik aan / klik uit clone)
Posted: Tuesday 12 January 2016 16:45
by Stuntteam
Just set up the remote and switch as described in the manual so that the remote can control the switch.
RFLink will learn this code automatically.
Re: Action Impuls (klik aan / klik uit clone)
Posted: Tuesday 12 January 2016 20:51
by NietGiftig
It works good with autolearning.
It recognizes the switches as TriState
Is it not possible to add without remote just as other brands can with the manual option?
Re: Action Impuls (klik aan / klik uit clone)
Posted: Tuesday 12 January 2016 21:17
by WilcoE
Hi,
Stuntteam wrote:Just set up the remote and switch as described in the manual so that the remote can control the switch.
RFLink will learn this code automatically.
The remote lost, so i dont have any remote for auto learning.
Re: Action Impuls (klik aan / klik uit clone)
Posted: Wednesday 13 January 2016 0:39
by Stuntteam
We will asap update Domoticz for that.
Also working on some other solutions.
Re: Action Impuls (klik aan / klik uit clone)
Posted: Wednesday 13 January 2016 7:08
by WilcoE
Stuntteam wrote:We will asap update Domoticz for that.
Also working on some other solutions.
Should be nice
