Invisible RaZberry
Posted: Wednesday 23 December 2015 18:42
I have been using Domoticz on a Raspberry Pi 2 with an Aeon Labs Z-Wave USB Stick for some months with no problems. I was hoping to create a new controller using a Raspberry PI Zero and a RaZberry Z-Wave Controller.
I followed this guide “Using Domoticz with the RaZberry Z-Wave Controller” http://www.vesternet.com/resources/appl ... _4xlxYU58E.
All goes to plan until the step “If the details of the RaZberry do not populate, click on the "Refresh" button:” Nothing I do at that point will make Domoticz show the details of the RaZberry. I also tried installing on my Raspberry Pi 2, but the result was just the same.
Both Raspberry boards have been updated to Raspian Jessie, not sure if that has any bearing on the problem.
Help please! Any suggestions welcome!
John
I followed this guide “Using Domoticz with the RaZberry Z-Wave Controller” http://www.vesternet.com/resources/appl ... _4xlxYU58E.
All goes to plan until the step “If the details of the RaZberry do not populate, click on the "Refresh" button:” Nothing I do at that point will make Domoticz show the details of the RaZberry. I also tried installing on my Raspberry Pi 2, but the result was just the same.
Both Raspberry boards have been updated to Raspian Jessie, not sure if that has any bearing on the problem.
Help please! Any suggestions welcome!
John