Domoticz

Is there anybody who also uses this remote for the duco air ventilion and got this working with RFlink ?
The remote itself is an battery powered control unit with 4 different buttons: 1,2,3 and auto .

What are the specs of the remote in terms of frequency and protocol?
Does RFX-Manager see the remote?

Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.

RF-apparatuur op 868 MHz see the manual http://www.duco.eu/Wes/CDN/1/Attachment ... 923179.pdf

That does not change anything.. RFlink already has some 868 protocols and when you use it with the right RF modules will work fine on that frequency. Just like the fact that it works on 315 mhz and 915 mhz.

Stuntteam : that would be nice ! Because we also we have this duco air system also

Is there an update on this?
I have Duco ventilationa and would very much like to implement it in my Domoticz setu.
Currently I run a Raspberry Pi with RFXcom 433E.
Can anyone tell me what hardware I'd need and how to implement it?

Dank,

Freek

Hope this will be implemented.

I'm very interested if this is implemented somehow in the mean while.
We bought a new house which contains a Duco box. My current Perilex solution does not fit there. The system works with RF but I hope there is a solution with RFXcom. Otherwhise I have to capture the signal myself and build a own solution.

Any updates on this topic?
I'm also looking for a solution to connect to duco box. Now I'm using it with 2 rf sensors.

I did find this 'schakel contact' (switch contact) http://www.duco.eu/nl-nl-producten/nl-n ... kelcontact

Is that the way to go?

Stuntteam wrote: ↑Monday 21 December 2015 0:19 Hi,

The Duco is, so far, not supported.
Use the RFLink Loader program and record the button signals with the debug mode.

Hi Stuntteam

I've tried both 'Debug' and 'Unhandled' mode, but the tool doesn't show any signals.
Is there anything else I can try?

FYI, my module does detect other (supported) devices.

I think because Duco uses 866mhz

Sent from my SM-G935F using Tapatalk

The Duco is using 868 mhz with FSK modulation.
We are working on it.

Re-do since previous post was removed..

Hi there,

This is my first post, I've already red many topics with great interest. Thanks for that, great to see so many people participate and help each other.I am also curious how to connect to the Duco box, haven't tried so far but would be nice to control it without placing the extra 'wireless switches' inside the box.

The search continous..

I am fighting with it as well, so maybe I will share some things that I've found
I currently do try to sniff the signal using rtl_433 (using rtl_sdk), and I do have challenges.

The problem is of course to determine parameters for signal decoding, currently I am trying like this:
rtl_433 -f 868000000 -A -X 'n=DUCO,m=OOK_PWM,s=11,l=83,r=500,g=150,t=5,y=0'
But not to much success... still not able to decode signal, below I am attaching structure of the data found on some community

I am happy to share the signal (with numbers of parameters) ... maybe someone can help me determine parameters, I will be to happy to share output