Domoticz

Posted: **Wednesday 18 November 2015 18:15**

I'm new to this, so be gentle

I've got an RFXCOM connected to Domoticz on a Pi 2. I also have an OWL CM160 with a single sensor that talks to an in-house display. the RFX is sensing the data from OWL but it isn't decoding it. The device shows up as "General"/"kWh and the data is incorrect. I think it's just showing total energy.

Any ideas on how to debug this?

Gareth

Posted: **Wednesday 18 November 2015 19:56**

Please try with RFXmngr and only the Oregon protocol enabled.

Posted: **Wednesday 18 November 2015 20:01**

Also post some screenshots plz

Posted: **Thursday 19 November 2015 9:26**

Hi
The RFX is already set to only receive Oregon Scientific protocols

Hardware

: Hardware; Screenshot 2015-11-19 08.19.33.png (46.31 KiB) Viewed 1390 times

Devices

: Devices; Screenshot 2015-11-19 08.21.04.png (34.06 KiB) Viewed 1390 times

Log

: Log entry; Screenshot 2015-11-19 08.21.37.png (25.4 KiB) Viewed 1390 times

Sorry about the screen size of the images, but I don't know how to shrink them.

Gareth

Domoticz

Debugging OWL CM160

Debugging OWL CM160

Re: Debugging OWL CM160

Re: Debugging OWL CM160

Re: Debugging OWL CM160