Domoticz

This is my first post. Thank you for creating this amazing project. We´re a small team of student of the UPCT (Cartagena University, Spain), called UPCT Makers:
http://www.makers.upct.es/?cat=21

We're working now with the extremely cheap ESP8266 and mainly we're using it running the ESP Easy firmware.
We´re planning to design a complete set of devices with its own power supply, the ESP and the sensor or actuators. We´ll design also their cases and support (to fix motors, or instance) ready to 3D printing, and of course their own PCB. We´re planning to achieve a device with relay with a price between 5 and .
All our project wil be upload to Thingiverse and Sourceforge.

We hope you all find these small adaptations interesting.

Greetings.

PS: I´ve done a lot of minor changes on Transifex (spelling and style). When those changes will take effect?


EDIT:

Hello,

After a couple of years I release my whole project almost finished.

Finnaly it consist in a base PCB and several plugins, with their 3D cases. I could design more if you want to.
Also I include 3D printing designs (cases and devices), including one device that can accommodate a NEMA17 to drive a shutter.
Really, now we have devices like Sonoff, so for example my relay shield is a silly thing, but others of my shields, like the DC control (LED strips..) and the stepper controller (motors), may be interesting for you all.

The original archives are in DipTrace (PCB designer, freeware) and Solidworks (3D design software).
Would be so easy for anyone to send PCB's to any chinese manufactures for a couple of dollars and assemble yourself in house.
If you need I can generate gerber files of any of my designs, just ask me.

Here you got: https://goo.gl/NRLWPz

If you have any question or suggestion, please, don't hesitate. This is free hardware!

mmm

Please can u give me a example what you are planning to do with your project in Domoticz?

Already done by ESPEasy team !

http://www.esp8266.nu/index.php/Main_Page

Really nice project, thanks for sharing.

Still missing some information about the connection with Domoticz:

I did this tutorial:
Using the ESP Easy as a simple input switch in Domoticz
http://www.esp8266.nu/index.php/Tutoria ... icz_Switch

I've uploaded the code and configured the esp8266 to my network. Seems to work as I see in the log file:

Welcome to ESP Easy : ESP8266

MainConfigHardwareDevicesTools

Log
127202 : WD : Uptime 2 ConnectFailures 0 FreeMem 18112
157214 : WD : Uptime 2 ConnectFailures 0 FreeMem 18072
187218 : WD : Uptime 3 ConnectFailures 0 FreeMem 18016
217223 : WD : Uptime 3 ConnectFailures 0 FreeMem 18000
230315 : SW : State 1
232398 : SW : State 0
234436 : SW : State 1
236480 : SW : State 0
238725 : SW : State 1
247224 : WD : Uptime 4 ConnectFailures 0 FreeMem 17984

Following the tutorial; In Domoticz I created a virtual switch:

Turn On 39 ESP8266 0014076 1 ESP8266 Lighting 2 AC Off 7

I have 2 questions:

1. In the configuration page of the esp8266 we see the "Controller IP" entry. Is this the same IP as the Domoticz webserver IP?
2.What else do I have to configure to make a working connection between the esp8266 and Domoticz

Thanks for reading.

Yes I've got it

1. Yes, it's the same IP
2. Dashboard > Switches >Edit your ESP switch > On Action: http://<IP>/control?cmd=GPIO,0,0. Off Action: http://<IP>/control?cmd=GPIO,0,1

regards,

MarioMaker wrote:This is my first post. Thank you for creating this amazing project. We´re a small team of student of the UPCT (Cartagena University, Spain), called UPCT Makers:
http://www.makers.upct.es/?cat=21

We're working now with the extremely cheap ESP8266 and mainly we're using it running the ESP Easy firmware.
We´re planning to design a complete set of devices with its own power supply, the ESP and the sensor or actuators. We´ll design also their cases and support (to fix motors, or instance) ready to 3D printing, and of course their own PCB. We´re planning to achieve a device with relay with a price between 5 and 7 $.
All our project wil be upload to Thingiverse and Sourceforge.

We hope you all find these small adaptations interesting.

Greetings.

PS: I´ve done a lot of minor changes on Transifex (spelling and style). When those changes will take effect?

If you really want to get something out of it: make them available for sale. I will give you my money if you can give me a complete working ESP switch/pir in a nice housing. I like DIY, but I also like to have an option when I dont have the time. Off course there are Zwave devices, but the are not as open or flexible as ESP.

Good luck!

count me in
if they are available for sale i would buy a bounch of them to inplent them in my domoticz house
Greetz BigDog/Bob

The first post was the last post

dijkdj wrote:The first post was the last post

Yes that's sadly true, students i think, probably short memory
http://www.makers.upct.es/?cat=21

But it is not not the project ESPEasy
http://www.esp8266.nu/index.php/Main_Page

Better to ask you questions about ESPEasy and Domoticz on their forum
http://www.esp8266.nu/forum/

Not to worry.

Check this out: the Oak, by Digistump.

An Arduino compatible, WiFi built-in device with the ESP8266.
Can be programmed wirelessly, cloud-based IDE, REST API, lots of other goodies, very small, very cheap.

I ordered a couple from the Kickstarter campaign, they're being shipped now. I can't wait for them to arrive!

Conn-artist wrote:I ordered a couple from the Kickstarter campaign, they're being shipped now. I can't wait for them to arrive!

And???

Oh man, has it been 6 months already?

I received three Oaks and had to wait a few weeks before the official firmware was released, but since it's a Kickstarter project that wasn't a problem. I did have issues loading the firmware and connecting the Oaks to my wireless network. In fact, one of the three has refused so far, which makes it unusable. I have ordered, and not received, an FTDI programmer, hoping that that would work better than over the air programming.

The Particle dashboard was not available for creating sketches - I could see my Oaks on it (i.e. they did connect to the Particle cloud) but sketches wouldn't compile - something that is being worked on by the Oak and Particle teams (in fact, it may be working now, I haven't checked). I am using the Arduino IDE now, which works very well and is faster than the Particle dashboard, anyway.

The build quality is excellent, nothing bad to say about it.

I made a project for reading sensor data from a Voltcraft CO-100 and that went well. Had to get used a bit to the peculiarities of the device (as opposed to, say, an Arduino) but nothing unsurmountable. It's running 24/7 and very stable.

My initial enthusiasm has tempered a bit: coding through a web interface is not my thing. It's just too slow and I like to have my code on my own computer in stead of someone else's. Also I don't see myself uploading data to 'the cloud': I did that with Pachube/Xively for a while and it's cool and all, but since I am also running Domoticz with its awesome graphing capabilities there's really no need to upload my data to someone else's database. Heck, if I want to show someone the CO2 levels in my home I can connect to Domoticz through an Openvpn almost just as easily (if a bit slower) as going to Particle's website.

I bought another ESP8266 board (NodeMCU) which has the similar capabilities top the Oak but lacks the Particle goodies, and it performs very satisfactorily as well (also talks to Domoticz, also over MQTT).

So unless you're really into the whole Cloud integration with Particle, IFTTT, etcetera I'd stick with a NodeMCU because they're dirt cheap and readily available

Conn-artist wrote:I made a project for reading sensor data from a Voltcraft CO-100 and that went well.

Have done a similar thing with a cheap chinese power meter http://www.domoticz.com/forum/viewtopic ... wer#p56059. using native C (SDK 1.5.2) and TuanPM's MQTT library https://github.com/tuanpmt/esp_mqtt and Node Red, works great, have 4 of these running now.

Hey, that's a pretty good idea to figure out how much the fridge is really using

Conn-artist wrote:Hey, that's a pretty good idea to figure out how much the fridge is really using

Like this?

Exactly

Hello,

After a couple of years I release my whole project almost finished.

Finnaly it consist in a base PCB and several plugins, with their 3D cases. I could design more if you want to.
Also I include 3D printing designs (cases and devices), including one device that can accommodate a NEMA17 to drive a shutter.
Really, now we have devices like Sonoff, so for example my relay shield is a silly thing, but others of my shields, like the DC control (LED strips..) and the stepper controller (motors), may be interesting for you all.

The original archives are in DipTrace (PCB designer, freeware) and Solidworks (3D design software).
Would be so easy for anyone to send PCB's to any chinese manufactures for a couple of dollars and assemble yourself in house.
If you need I can generate gerber files of any of my designs, just ask me.

Here you got: https://goo.gl/NRLWPz

If you have any question, please, don't hesitate.

You're doing fine, man. I wish you success. And the link you shared does not work for some reason. By the way, I think it will be interesting for you to look at this Australian site https://au.papersowl.com/case-study-writing-service it was incredibly useful for me. There you will find additional information for your work.