Domoticz

Hi. I have a ip camera enabled. Would like have a link in Dashboard but dont know do it. no "favorites" star icon like other devices.

Thanks!

if you assign switches to the camera, and those switches are favorite, you should see a webcam icon in the widget (top right)

Hi,

Maybe a very stupid question but how or where can i assugn a switch to a camera ...
When add a switch manually theres no possibilty to assign it to a camera..

Thanks in advance,
Hans

In the camera menu add a swich on the camera.

Thanks gizmocuz !

Hi, i dont know what you mean.. ive added two cams.. and i can see them in more options -> cameras... but where can i assign a switch?

Not by editing the camera.. not in manual add in switches.. and not in hardware.. the manual doesnt say it either

Thanks in advance,
Hans

DutchHans wrote:Hi, i dont know what you mean.. ive added two cams.. and i can see them in more options -> cameras... but where can i assign a switch?

Not by editing the camera.. not in manual add in switches.. and not in hardware.. the manual doesnt say it either

Thanks in advance,
Hans

Hans,

1. Go to the Camera Tab: Setup - More Options - Camera
2. Select the camera
3. Scroll down to 'ACTIVE DEVICES/SCENES'
4. Assign the desired switch to the camera (see screenshot below)
5. Go back to the switches tab
6. Now you see a little camera icon next to the switch

I got this to work, but I don't see the connection, as in why I need to assign the camera to a switch?
I added a virtual switch for this, but this seems more complicated than it should be.

Hesmink wrote:I got this to work, but I don't see the connection, as in why I need to assign the camera to a switch?

Maybe to switch on/off the camera?

HI,

This is an old threat, but I got the same issue. I have added the camera to domoticz, added a switch to it. But I don't see any icons appearing on the switch page or on the favorites page?

In the above setup it looks like the camera emails a snapshot when opening a door.

Hi,

Just trying to get my ipcam to work.
- Ip-Cam added
- Switch connected
- Notification and emailing a picture works

But now I want to have a popup/screen or something on my pc-monitor with the same picture as emailed to my mobile-phone.
When I push on the 'webcam' at the switch the popup will shown... but I want the picture to show when the sensor goes to on....

I hope you understand my problem. How can I solve this.

Hi.

I can't really see the point of adding a switch to the camera in the camera menu.
What is the purpose of it?

Send a snapshot to email is done by creating an event. Why I have to add the switch in the camera menu? What can it do?

Hmm. Thx for enlightening me
Ed

Yes, this doesn't make any sense at all to me either. It's very cumbersome and unintuitive. Are there any plans to implement the camera directly in dashboard, i.e. without an unwanted switch and directly showing a small preview?

This would greatly improve an otherwise already great setup

I have to say this would be the best upgrade we could expect to have Domoticz for the next update... Do you have any alternative to have a nice dashboard ? Cheers ! (b)

Yeah that would be nice.

I added the switch which turns on the camera.
Now i receive mail, but camera is still turning on.

I added the virtual switch which turns on when camara pings.
Now i receive again an email, with picture if i select send picture as atachment in gmail.

But i don't want email this way.
I just did this so i have the camara on the switch to get easy access to the stream.

I should be modified.
I hope it can be added in an extra tab "Camera's".

I also made an custom htmlpage in domoticz\www\templates

yes I think the camera management is not perfect in domoticz but I'm sure Gizmocus is preparing something to fix this. Thrust me : Domoticz will be the best tool for domotic on the market ! TO achieve this goal dev just need help : our feedbacks.

Bueno

How do I include a camera ip in domoticz, I'm trying to include a Panasonic IP camera BV-104W and I can not.

I already tried all the addresses of this tutorial:
https://www.domoticz.com/wiki/Camera_Setup

I can access the camera normally through the browser by typing the IP / port. Example: http://192.168.1.10:9989/

Camera Model: https://security.panasonic.com/pt/products/bl-vp104w/

I tested all the image formats of the Panasonic BL-VP104w on the domoticz of this link and I could not:
http://www.ispyconnect.com/man.aspx?n=panasonic

Anyone have any idea what it might be?

In the above setup it looks like the camera emails a snapshot when opening a door.

Heisenberg wrote: ↑Wednesday 12 August 2015 0:05

DutchHans wrote:Hi, i dont know what you mean.. ive added two cams.. and i can see them in more options -> cameras... but where can i assign a switch?

Not by editing the camera.. not in manual add in switches.. and not in hardware.. diebestetest the manual doesnt say it either

Thanks in advance,
Hans

Hans,

1. Go to the Camera Tab: Setup - More Options - Camera
2. Select the camera
3. Scroll down to 'ACTIVE DEVICES/SCENES'
4. Assign the desired switch to the camera (see screenshot below)
5. Go back to the switches tab
6. Now you see a little camera icon next to the switch

This is a very informative blog for me. I am very much benefited after reading this blog. Keep sharing.