Page 1 of 1
Thermostat setpoint
Posted: Sunday 02 November 2025 16:00
by jberinga
Recently I bought a new thermostat and I can't set the setpoint using the +/- buttons. When using a dial it does set the temperture for the thermostat, but I rather use the +/- buttons.
What could it be that I can't set the setpoint using the +/- buttons in Dashticz?
Re: Thermostat setpoint
Posted: Sunday 02 November 2025 19:57
by willemd
From the manual:
Code: Select all
Thermostat devicesī
For a thermostat IDX, IDX_1 or IDX_2 can be used. If IDX_1 is used the thermostat +/- buttons will not be shown. If IDX_2 is used the icon/image of the block can be changed as in a normal block.
Could this be the reason?
Re: Thermostat setpoint
Posted: Wednesday 05 November 2025 8:30
by jberinga
No, that has no influence. When using IDX_2 the +\- buttons are still not working.