P1 Smart Meter with LAN give me CRC error
P1 Smart Meter with USB works OK.
Same data are sent.
Anyone noticed the same problem ?
P1 Smart Meter with LAN
Moderator: leecollings
-
- Posts: 196
- Joined: Wednesday 31 May 2017 16:06
- Target OS: NAS (Synology & others)
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: P1 Smart Meter with LAN
No problems here. Also device could be a cause..
Synology with Domoticz build (V2024.7) in Docker
- gizmocuz
- Posts: 2394
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: P1 Smart Meter with LAN
Using it for years on various locations and with various hardware.
No issues.
What hardware are you using?
No issues.
What hardware are you using?
Quality outlives Quantity!
-
- Posts: 5
- Joined: Friday 05 July 2024 16:23
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: P1 Smart Meter with LAN
Domoticz 2023.2
Raspberry Pi 2 Model B Rev 1.1
ARMv7 Processor rev 5 (v7l)
Also tested on Raspberry Pi 3 Model B Rev 1.2 with the same problem (Domoticz 2023.2)
ARMv7 Processor rev 4 (v7l)
BR Gunnar
Raspberry Pi 2 Model B Rev 1.1
ARMv7 Processor rev 5 (v7l)
Also tested on Raspberry Pi 3 Model B Rev 1.2 with the same problem (Domoticz 2023.2)
ARMv7 Processor rev 4 (v7l)
BR Gunnar
- waltervl
- Posts: 5389
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: P1 Smart Meter with LAN
How do you go from USB to LAN? With sernet? Check this page https://www.domoticz.com/wiki/SharingSerialDevices
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 5
- Joined: Friday 05 July 2024 16:23
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: P1 Smart Meter with LAN
Hi !
I receive HanPort data with a raspbery pico and use a utelentserver sending data to LAN address and port.
I have tried different version line by line or buffered the hole package and send it.
Instead of use domoticz I let putty (or netcat) to recive the data and calculate the CRC and got a correct result.
I have also tried domoticz 2024.6 still with error.
Note: All P1 devices are updated ok with CRC check disabled
Using the USB inderface either with serial/USB or /dev/serial0 everything works ok with CRC check.
(P1 Meter is pre DSMR 4.0 - using DSMR 2.2 compatibility)
BR Gunnar
I receive HanPort data with a raspbery pico and use a utelentserver sending data to LAN address and port.
I have tried different version line by line or buffered the hole package and send it.
Instead of use domoticz I let putty (or netcat) to recive the data and calculate the CRC and got a correct result.
I have also tried domoticz 2024.6 still with error.
Note: All P1 devices are updated ok with CRC check disabled
Using the USB inderface either with serial/USB or /dev/serial0 everything works ok with CRC check.
(P1 Meter is pre DSMR 4.0 - using DSMR 2.2 compatibility)
BR Gunnar
-
- Posts: 50
- Joined: Wednesday 03 May 2023 10:12
- Target OS: NAS (Synology & others)
- Domoticz version:
- Contact:
Re: P1 Smart Meter with LAN
This comment puzzles me. The older message formats do not send a CRC and the log line you quoted here is because they also do not send any version info which causes domoticz to disable some features, including the CRC check.
Thus if after switching from USB to LAN domoticz fails to process the P1 data because of a wrong CRC, then you must have changed the original content to at least include a line that specifies a version >=4.0
-
- Posts: 5
- Joined: Friday 05 July 2024 16:23
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: P1 Smart Meter with LAN
Back on the road again !
Sorry, but the problem was the dummy data a used from a file that contain a faulty CRC.
Thank's for posted response !
BR Gunnar
Sorry, but the problem was the dummy data a used from a file that contain a faulty CRC.
Thank's for posted response !
BR Gunnar

Who is online
Users browsing this forum: No registered users and 0 guests