Domoticz

Code: Select all

[DEVICE]
# the IP address or hostname of the device
IP = 10.0.0.21

#The Device ID
ID = XXXXXXXXXXXX <- REPLACE THIS WITH YOU UNIT CODE, THESE ARE THE LAST 12 CHARACYERS OF YOUR WIFI UNITS SSID

# the idx of the switch in Domoticz to turn on or off
IDX_STATE = 789
IDX_SET = 790
IDX_OUTSIDE_TEMP = 800
IDX_INSIDE_TEMP = 799

Code: Select all

#!/usr/bin/env python3

import requests
import json
import urllib.parse
import urllib

import time

import sys
import configparser

sleep = 300

DEVICE_NAME = sys.argv[1] if len(sys.argv) > 1 else 'example'
config = configparser.ConfigParser()
config.read(DEVICE_NAME + '.ini')

try:
    DEVICE = config['DEVICE']
except (KeyError, TypeError):
    raise Exception('Device file is unreadable or incomplete.')


DEVICE_URL = 'http://' + DEVICE['IP']
DEVICE_ID = DEVICE['ID']
IDX_STATE = DEVICE['IDX_STATE']
IDX_SET = DEVICE['IDX_SET']
IDX_OUTSIDE_TEMP = DEVICE['IDX_OUTSIDE_TEMP']
IDX_INSIDE_TEMP = DEVICE['IDX_INSIDE_TEMP']

DOMOTICZ_URL = 'http://10.0.0.50:8080/json.htm?'

while True:

    try:

        print('Monitoring the ' + DEVICE_NAME)

        #Check status of the device
        payload = ' { "device_id":"' + str(DEVICE_ID) + '" ,"device_sub_id":0,"req_id":"","modified_by":"","set_level":"03","list":["iu_onoff","iu_indoor_tmp","iu_outdoor_tmp"] } '
        headers = {}

        res = requests.post( DEVICE_URL + "/GetParam" , data=payload, headers=headers)

        data = res.json()
        state = data["value"] 
        #print(data["value"])
        #print(state["iu_indoor_tmp"])
        #print(state["iu_onoff"])


        #Update the temperatures read from unti towards Domoticz
        inside_temp = (int(state["iu_indoor_tmp"]) - 5000) / 100
        outside_temp = (int(state["iu_outdoor_tmp"]) - 5000) / 100
        
        #print(inside_temp) 
        #print(outside_temp)
        
        print('Sending Domoticz the current outside temp on the airco unit')
        getVars = {'type': 'command', 'param': 'udevice', 'idx': IDX_OUTSIDE_TEMP, 'nvalue': 0, 'svalue': outside_temp}
        webUrl = urllib.request.urlopen(DOMOTICZ_URL + urllib.parse.urlencode(getVars))

        print('Sending Domoticz the current inside temp of the airco room unit')
        getVars = {'type': 'command', 'param': 'udevice', 'idx': IDX_INSIDE_TEMP, 'nvalue': 0, 'svalue': inside_temp}
        webUrl = urllib.request.urlopen(DOMOTICZ_URL + urllib.parse.urlencode(getVars))



        #Check what Domoticz already knows about the state of the unit
        res = requests.post(DOMOTICZ_URL + 'type=command&param=getdevices&rid=' + IDX_STATE)
        data = res.json()
        #print('Now for the result of STATE')
        #print(data['result'][0]['Status'])

        STATE_DOMOTICZ = data['result'][0]['Status']

        if (state["iu_onoff"] == '0') and (STATE_DOMOTICZ == "On"):
            print('Telling Domoticz the device is OFF because it doesnt know yet')
            getVars = {'type': 'command', 'param': 'switchlight', 'idx': IDX_STATE, 'switchcmd': 'Off', 'level': 0, 'passcode': ''}
            webUrl = urllib.request.urlopen(DOMOTICZ_URL + urllib.parse.urlencode(getVars))
        if (state["iu_onoff"] == '1') and (STATE_DOMOTICZ =="Off"):   
            print('Telling Domoticz the device is ON because it doesnt know yet')
            getVars = {'type': 'command', 'param': 'switchlight', 'idx': IDX_STATE, 'switchcmd': 'On', 'level': 0, 'passcode': ''}
            webUrl = urllib.request.urlopen(DOMOTICZ_URL + urllib.parse.urlencode(getVars))

        #Check status of what we should do
        time.sleep(5)
        res = requests.post(DOMOTICZ_URL + 'type=command&param=getdevices&rid=' + IDX_SET)
        data = res.json()
        
        #print('Now for the result')
        #print(data['result'][0]['Status'])

        SWITCH_SET_DOMOTICZ = data['result'][0]['Status']

        #Set state of the device to off
        payload = ' { "device_id":"' + str(DEVICE_ID) + '" ,"device_sub_id":0,"req_id":"","modified_by":"","set_level":"02","value":{"iu_onoff":"0"}}'
        headers = {}
       
        if (state["iu_onoff"] == '1') and (SWITCH_SET_DOMOTICZ == 'Off') :          
            res = requests.post( DEVICE_URL + "/SetParam" , data=payload, headers=headers)
            #Tell Domoticz it is off now
            getVars = {'type': 'command', 'param': 'switchlight', 'idx': IDX_STATE, 'switchcmd': 'Off', 'level': 0, 'passcode': ''}
            webUrl = urllib.request.urlopen(DOMOTICZ_URL + urllib.parse.urlencode(getVars))


        #Let's check the time so we can switch off some lights
        #Get Servertime of Domoticz
        #print(data['ServerTime'])
        time_now = time.strptime(data['ServerTime'], "%Y-%m-%d %H:%M:%S")
        #print(time_now.tm_hour)

        #Check status of the device
        #payload = ' { "device_id":"' + str(DEVICE_ID) + '" ,"device_sub_id":0,"req_id":"","modified_by":"","set_level":"03","list":["iu_wifi_led"] } '
        #headers = {}

        #res = requests.post( DEVICE_URL + "/GetParam" , data=payload, headers=headers)

        #data = res.json()
        #print(data)
        #state = data["value"]
        #print('Wifi-LED State: ' + state["iu_wifi_led"])

        #Set state of the device to off
        #payload_off = ' { "device_id":"' + str(DEVICE_ID) + '" ,"device_sub_id":0,"req_id":"","modified_by":"","set_level":"02","value":{"iu_wifi_led":"0"}}'
        #payload_on = ' { "device_id":"' + str(DEVICE_ID) + '" ,"device_sub_id":0,"req_id":"","modified_by":"","set_level":"02","value":{"iu_wifi_led":"1"}}'
        #headers = {}



        #if ((time_now.tm_hour < 8) or (time_now.tm_hour > 19)) and (state["iu_wifi_led"] == '1') :
        #    print('Set the lights OFF')
        #    res = requests.post( DEVICE_URL + "/SetParam" , data=payload_off, headers=headers)
        #elif ((time_now.tm_hour > 8) or (time_now.tm_hour < 19)) and (state["iu_wifi_led"] == '0') :
        #    print('Set the lights ON')
        #    res = requests.post( DEVICE_URL + "/SetParam" , data=payload_on, headers=headers)

    except Exception as err:
        print(f"[ERROR]", {err})
                      
    time.sleep(sleep)