2-wire intercom: get and send signals
Posted: Tuesday 02 April 2024 11:32
In our apartment building, we have a 2-wire intercom. With this intercom, 2 doors can be opened. These doors can only be opened after a bell is pressed
The first one is a doorbell (per apartment) on the ground floor for the general door to the apartment.
The second one is a doorbell (per apartment) and a door on each floor. Opening happens with the same button on a Bticino intercom hand unit.
In our apartment building, we have a 2-wire intercom. With this intercom, 2 doors can be opened. These doors can only be opened after a bell is pressed. So there seem to be 2 different outgoing (and maybe also incoming) signals
Is there a way to 'learn' these signals (bell pressed) and respond automatically to an incoming signal with a door-opening signal (also 'learned')?
Please let me know or point me to some more info
The first one is a doorbell (per apartment) on the ground floor for the general door to the apartment.
The second one is a doorbell (per apartment) and a door on each floor. Opening happens with the same button on a Bticino intercom hand unit.
In our apartment building, we have a 2-wire intercom. With this intercom, 2 doors can be opened. These doors can only be opened after a bell is pressed. So there seem to be 2 different outgoing (and maybe also incoming) signals
Is there a way to 'learn' these signals (bell pressed) and respond automatically to an incoming signal with a door-opening signal (also 'learned')?
Please let me know or point me to some more info