Second PVOutput input/import

Moderator: leecollings

Post Reply
Huupke
Posts: 25
Joined: Monday 21 October 2019 10:49
Target OS: Raspberry Pi / ODroid
Domoticz version: 2024.4
Location: Boxtel, Netherlands
Contact:

Second PVOutput input/import

Post by Huupke »

In PVOutput I've added a second system and a third system next to what I already had. My initial system is a Fronius inverter and I now added a SolarEdge system. In PVOutput I've added a third virtual system which is only a parent aggregation of the 2 real systems.

In Domoticz I've added a second and third hardware item of the type 'PVOutput (Input)'. By using the System Id (of PVOutput) I. expect I could have now 3 PVoutput imports with the associated devices. After adding a second and/or third hardware item I'm not getting the devices like I got from the first PVOutput hardware.

Did anyone get a second PVOutput input/import to work? If so, any tips or checks I can apply?
Running V2024.4 on RPi3B+ & development/HEAD on RPi4B
Huupke
Posts: 25
Joined: Monday 21 October 2019 10:49
Target OS: Raspberry Pi / ODroid
Domoticz version: 2024.4
Location: Boxtel, Netherlands
Contact:

Re: Second PVOutput input/import

Post by Huupke »

Never mind. My mistake: I turned off 'Accept new Hardware Devices' in Settings -> System.
Running V2024.4 on RPi3B+ & development/HEAD on RPi4B
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests