Z-Wave not working under Zwave-JS-UI
Moderator: leecollings
-
- Posts: 28
- Joined: Friday 25 April 2014 19:45
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
no this one doesn't work like that I took the device to the stick
- waltervl
- Posts: 5397
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Discovery prefix (default homeassistant) in Zwave-JS-UI cannot be the same as the normal prefix (default zwave). So they cannot be all Zwavejs.... So check your settings in Zwave-JS-UI that you not made them the same.
The discovery prefix of Zwave-JS-UI (default homeassistant) should be filled in Domoticz MQTT auto discover configuration.
The discovery prefix of Zwave-JS-UI (default homeassistant) should be filled in Domoticz MQTT auto discover configuration.
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Re: Z-Wave not working under Zwave-JS-UI
Make sure to set domoticz to allow new devices and hit save in Zwave js ui
- waltervl
- Posts: 5397
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Also Domoticz is not a very smart choice as it is the same as the default Domoticz topic when using the Domoticz MQTT hardware gateway. Better leave it all just default....
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 365
- Joined: Sunday 03 July 2016 16:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2024.7
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
@waltervl
I should not advise to keep all prefix to be homeassistant.
In case you are using AD for different sources such as zwave, zigbee, otgw etc. it makes it difficult to see relevant data in mqtt explorer.
I should not advise to keep all prefix to be homeassistant.
In case you are using AD for different sources such as zwave, zigbee, otgw etc. it makes it difficult to see relevant data in mqtt explorer.
Raspberry pi 3b
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
- waltervl
- Posts: 5397
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Yes, so for users not so knowledgable and only using Zwave-JS-UI default settings is the best to avoid situations like this.
If you add Zigbee2MQTT you can choose to change the Discovery prefix settings in Zigbee2MQTT or Zwave-js-ui. But is is not needed. And only change the Discovery prefix as both platforms already use different prefixes for their own topics by default (zigbee2mqtt and zwave).
If you add Zigbee2MQTT you can choose to change the Discovery prefix settings in Zigbee2MQTT or Zwave-js-ui. But is is not needed. And only change the Discovery prefix as both platforms already use different prefixes for their own topics by default (zigbee2mqtt and zwave).
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 365
- Joined: Sunday 03 July 2016 16:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2024.7
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
@waltervl
for the records. prefix zwavejs works like a charm whereas just zwave don't.
for the records. prefix zwavejs works like a charm whereas just zwave don't.
Raspberry pi 3b
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
- waltervl
- Posts: 5397
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Are you talking on the zwave-js-ui MQTT prefix or the zwave-js-ui Discovery prefix?
There should be no difference between zwave or zwavejs for MQTT prefix unless you use prefix zwave also for something else in your MQTT environment.
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 365
- Joined: Sunday 03 July 2016 16:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2024.7
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
when I was in process of getting the zwavejs-ui the mqtt prefix zwave (aof course same in domoticz) did not work.
After changing into zwavejs it did.
After changing into zwavejs it did.
Raspberry pi 3b
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
- waltervl
- Posts: 5397
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Again you are mixing up things. In Domoticz you should enter the Zwave-JS-UI Discovery prefix (default: homeassistant).
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 365
- Joined: Sunday 03 July 2016 16:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2024.7
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
well of course you shouldnot .
once in zwavejs-ui you set zwavejs as prefix in domoticz it has to be same
once in zwavejs-ui you set zwavejs as prefix in domoticz it has to be same
Raspberry pi 3b
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
- jvdz
- Posts: 2208
- Joined: Tuesday 30 December 2014 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.107
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Guys, please take this offline as this doesn't contribute to the current issue which is with ZWAVEJS2MQTT & the ZWAVEME usb stick, which currently doesn't allow to join the devices again to it!
You seem to be agreeing without knowing it... so PM is a great tool for that!
You seem to be agreeing without knowing it... so PM is a great tool for that!
New Garbage collection scripts: https://github.com/jvanderzande/GarbageCalendar
-
- Posts: 365
- Joined: Sunday 03 July 2016 16:16
- Target OS: Raspberry Pi / ODroid
- Domoticz version: V2024.7
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
@Keef
Do you have more info about type of zwave stick apart from zwaveme??
Do you have more info about type of zwave stick apart from zwaveme??
Raspberry pi 3b
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
Arduino
KAKU
RfxCom
Zwave2MQTT
OTGW
Chinese sensors temp (Dallas),movement
Tasmota
Esp8266 / 32 espeasy
Zigbee2MQTT
-
- Posts: 28
- Joined: Friday 25 April 2014 19:45
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Something like this?
- Attachments
-
- domoticz2.jpg (18.04 KiB) Viewed 1149 times
-
- z-wave js.jpg (55.13 KiB) Viewed 1149 times
Re: Z-Wave not working under Zwave-JS-UI
That seems about right, are you able to see the devices in Zwave js Anyway? And control them from there?
I don't get that from what's currently posted.
I don't get that from what's currently posted.
-
- Posts: 28
- Joined: Friday 25 April 2014 19:45
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
I can only see my zwave stick and I can't add anything
- jvdz
- Posts: 2208
- Joined: Tuesday 30 December 2014 19:25
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.107
- Location: Netherlands
- Contact:
Re: Z-Wave not working under Zwave-JS-UI
Did you look for support on this issue on the ZwaveJS2Mqtt github site?
What have you done in an effort to try and debug this?
Did you look at the Logfiles in ZwaveJS2Mqtt for errors?
What have you done in an effort to try and debug this?
Did you look at the Logfiles in ZwaveJS2Mqtt for errors?
New Garbage collection scripts: https://github.com/jvanderzande/GarbageCalendar
Re: Z-Wave not working under Zwave-JS-UI
Yeah, first it needs to work on Zwave-JS, otherwise it will never work on Domoticz.
Who is online
Users browsing this forum: No registered users and 0 guests