Domoticz

Im a first Time user of Domoticz , with very Basic Linux experience not Programming Experience and lot of Windows and generall Support experience as First and Second Level Support IT. But i have basic problems, which i should not have, comparing with Videos i found on the webz.
So here i have my equipment:
Eastron SDM630 V2
Raspberry 3B
Here the 2 USB to RS485 adapters:
1: On Amazon Link removed/gp/product/B09P8CX69G/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
2: On Amazon Link removed/gp/product/B08DXLJF8J/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

I Installed Raspberry OS on 5 15 61-v7+
I access via remotely via VNC

and i installed sudo bash -c "$(curl -sSfL https://Link removed)"

and to have my Device preconfigered ``installed´´ the sdm plugin via this:

cd ~/domoticz/plugins
git clone Link removed /MFxMF/SDM630-Modbus

After restart i see the plugin , configure it as found on the webz. It seems like it is not receiving any data on the Devices site.
Can you support me in finding my problem?
I chose the settings as follows:
Baud Rate: 9600
Device ID(as configured in the Smart meter): 10
And i chose the Listed USB device in the Modbus Port.
Please help me!