Question: How are Temp values calculated from many pushed values
Posted: Thursday 20 January 2022 8:15
Just a question.
The temp log stores temp values for every 5 minutes (5 min per default)
My ESP device pushes every 30 seconds the measured temp.
This means every 5 minutes there are 10 measurements send to Domoticz.
How does Domoticz derive the value stored in the log from the many received measurements ?
Thanks in advance.
The temp log stores temp values for every 5 minutes (5 min per default)
My ESP device pushes every 30 seconds the measured temp.
This means every 5 minutes there are 10 measurements send to Domoticz.
How does Domoticz derive the value stored in the log from the many received measurements ?
Thanks in advance.