Domoticz • Reading inputs and outputs of the beaglebone with domoticz

Page 1 of 1

Reading inputs and outputs of the beaglebone with domoticz

Posted: Sunday 08 August 2021 8:49

by HUGOCASAL

Hello

Can domoticz read the inputs and outputs of a beaglebone board?

Thanks

Re: Reading inputs and outputs of the beaglebone with domoticz

Posted: Sunday 08 August 2021 10:36

by waltervl

If the beaglebone OS supports the standard SYSFS GPIO method Domoticz should be able to communicate with it. https://www.domoticz.com/wiki/GPIO#Option_1_-_SYSFS

Re: Reading inputs and outputs of the beaglebone with domoticz

Posted: Wednesday 11 August 2021 4:12

by HUGOCASAL

Thanks for the help

I will check on the Beaglebone forum to see if your operating system supports this standard.

Regards