Domoticz

EddyG wrote: ↑Monday 09 November 2020 9:33 Today Domoticz did not compile any more. I got this error

Code: Select all

-- JsonCpp Version: 1.9.4
######################################################
# jsoncpp should not be configured & built in the jsoncpp source directory
# You must run cmake in a build directory.
# For example:
# mkdir jsoncpp-Sandbox ; cd jsoncpp-sandbox
# git clone https://github.com/open-source-parsers/jsoncpp.git # or download & unpack the source tarball
# mkdir jsoncpp-build
# this will create the following directory structure
#
# jsoncpp-Sandbox
#  +--jsoncpp
#  +--jsoncpp-build
#
# Then you can proceed to configure and build
# by using the following commands
#
# cd jsoncpp-build
# cmake ../jsoncpp # or ccmake, or cmake-gui
# make
#
# NOTE: Given that you already tried to make an in-source build
#       CMake have already created several files & directories
#       in your source tree. run 'git status' to find them and
#       remove them by doing:
#
#       cd jsoncpp-Sandbox/jsoncpp
#       git clean -n -d
#       git clean -f -d
#       git checkout --
#
######################################################
CMake Error at extern/jsoncpp/include/PreventInSourceBuilds.cmake:41 (message):
  Quitting configuration
Call Stack (most recent call first):
  extern/jsoncpp/include/PreventInSourceBuilds.cmake:45 (AssureOutOfSourceBuilds)
  extern/jsoncpp/CMakeLists.txt:78 (include)

If I follow the instructions jsoncpp does compile correctly.
I did a fresh install of sources, but that did not help.
I saw on github that this is a commit of 2 days ago.
https://github.com/open-source-parsers/ ... be4d6e2241
How to solve that error?

EDIT:
Found a temporary solution by commenting out the 2 added lines in the CMakeLists.txt file.

EddyG wrote: ↑Sunday 13 December 2020 9:57 With the latest sources it is no longer a problem any more.
The json sources are now forked from a previous commit that did not have this problem.
It was about these 2 lines. https://github.com/open-source-parsers/ ... be4d6e2241

Spoiler: show

pi@raspberry:~/domoticz $ sudo cmake -DCMAKE_BUILD_TYPE=Release CMakeLists.txt
-- The C compiler identification is GNU 8.3.0
-- The CXX compiler identification is GNU 8.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc - works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ - works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Submodule update
From https://github.com/open-source-parsers/jsoncpp
* [new branch] jsoncpp_version -> origin/jsoncpp_version
5f4e104..9409824 master -> origin/master
Submodule path 'extern/jsoncpp': checked out '940982438d01fe2575acef8dd98a9b6893ccc9bb'
Submodule path 'extern/minizip': checked out '78eb93e8e0ba228f37b197d2022d66b73856c9ff'
From https://github.com/eclipse/mosquitto
24df1638..79339ce5 1.6.x -> origin/1.6.x
+ 49f4ffb5...122e6ecf coverity-develop -> origin/coverity-develop (forced update)
6f4e0a15..e02b5a27 coverity-fixes -> origin/coverity-fixes
988b5cf0..122e6ecf develop -> origin/develop
* [new branch] dynamic-bridge -> origin/dynamic-bridge
6f4e0a15..9d3732a6 fixes -> origin/fixes
3a13205e..faeb9e91 master -> origin/master
* [new tag] v2.0.0 -> v2.0.0
* [new tag] v2.0.1 -> v2.0.1
* [new tag] v2.0.2 -> v2.0.2
* [new tag] v2.0.3 -> v2.0.3
* [new tag] v2.0.4 -> v2.0.4
Submodule path 'extern/mosquitto': checked out 'faeb9e9122c35d24bc6667a48275e37b5732f54a'
Submodule path 'extern/sqlite-amalgamation': checked out '6c4bf38eba9ddd3e0493c95c489710070d095dea'
-- LUA library found at: /usr/lib/i386-linux-gnu/liblua5.3.a
-- Found PythonInterp: /usr/bin/python3 (found suitable version "3.7.3", minimum required is "3.4")
-- Found PythonLibs: /usr/lib/i386-linux-gnu/libpython3.7m.so (found suitable version "3.7.3", minimum required is "3.4")
-- Python3 includes found at: /usr/include/python3.7m
-- Looking for execinfo.h
-- Looking for execinfo.h - found
-- Looking for 3 include files sys/types.h, ..., linux/i2c.h
-- Looking for 3 include files sys/types.h, ..., linux/i2c.h - found
-- Building with I2C support
-- Looking for include files sys/types.h, linux/spi/spidev.h
-- Looking for include files sys/types.h, linux/spi/spidev.h - found
-- Building with SPI support
-- ###########################
-- Compiling Revision #12758
-- ###########################
-- Check if the system is big endian
-- Searching 16 bit integer
-- Looking for sys/types.h
-- Looking for sys/types.h - found
-- Looking for stdint.h
-- Looking for stdint.h - found
-- Looking for stddef.h
-- Looking for stddef.h - found
-- Check size of unsigned short
-- Check size of unsigned short - done
-- Searching 16 bit integer - Using unsigned short
-- Check if the system is big endian - little endian
-- Using builtin jsoncpp library
-- JsonCpp Version: 1.9.4
######################################################
# jsoncpp should not be configured & built in the jsoncpp source directory
# You must run cmake in a build directory.
# For example:
# mkdir jsoncpp-Sandbox ; cd jsoncpp-sandbox
# git clone https://github.com/open-source-parsers/jsoncpp.git # or download & unpack the source tarball
# mkdir jsoncpp-build
# this will create the following directory structure
#
# jsoncpp-Sandbox
# +--jsoncpp
# +--jsoncpp-build
#
# Then you can proceed to configure and build
# by using the following commands
#
# cd jsoncpp-build
# cmake ../jsoncpp # or ccmake, or cmake-gui
# make
#
# NOTE: Given that you already tried to make an in-source build
# CMake have already created several files & directories
# in your source tree. run 'git status' to find them and
# remove them by doing:
#
# cd jsoncpp-Sandbox/jsoncpp
# git clean -n -d
# git clean -f -d
# git checkout --
#
######################################################
CMake Error at extern/jsoncpp/include/PreventInSourceBuilds.cmake:41 (message):
Quitting configuration
Call Stack (most recent call first):
extern/jsoncpp/include/PreventInSourceBuilds.cmake:45 (AssureOutOfSourceBuilds)
extern/jsoncpp/CMakeLists.txt:78 (include)


-- Configuring incomplete, errors occurred!
See also "/home/pi/domoticz/CMakeFiles/CMakeOutput.log".

Spoiler: show

Code: Select all

- Submodule update
-- LUA library found at: /usr/lib/arm-linux-gnueabihf/liblua5.3.a
-- Python3 includes found at: /usr/include/python3.5m
-- Building with I2C support
-- Building with SPI support
-- ###########################
-- Compiling Revision #12894
-- ###########################
-- Using builtin jsoncpp library
-- JsonCpp Version: 1.9.4
######################################################
# jsoncpp should not be configured & built in the jsoncpp source directory
# You must run cmake in a build directory.
# For example:
# mkdir jsoncpp-Sandbox ; cd jsoncpp-sandbox
# git clone https://github.com/open-source-parsers/jsoncpp.git # or download & unpack the source tarball
# mkdir jsoncpp-build
# this will create the following directory structure
#
# jsoncpp-Sandbox
#  +--jsoncpp
#  +--jsoncpp-build
#
# Then you can proceed to configure and build
# by using the following commands
#
# cd jsoncpp-build
# cmake ../jsoncpp # or ccmake, or cmake-gui
# make
#
# NOTE: Given that you already tried to make an in-source build
#       CMake have already created several files & directories
#       in your source tree. run 'git status' to find them and
#       remove them by doing:
#
#       cd jsoncpp-Sandbox/jsoncpp
#       git clean -n -d
#       git clean -f -d
#       git checkout --
#
######################################################
CMake Error at extern/jsoncpp/include/PreventInSourceBuilds.cmake:41 (message):
  Quitting configuration
Call Stack (most recent call first):
  extern/jsoncpp/include/PreventInSourceBuilds.cmake:45 (AssureOutOfSourceBuilds)
  extern/jsoncpp/CMakeLists.txt:78 (include)

yann500 wrote: ↑Friday 29 January 2021 15:16 -- Configuring incomplete, errors occurred!
See also "/home/pi/dev-domoticz/CMakeFiles/CMakeOutput.log".
Makefile:7831 : la recette pour la cible « cmake_check_build_system » a échouée
make: *** [cmake_check_build_system] Erreur 1

Code: Select all

-- Using builtin jsoncpp library
-- JsonCpp Version: 1.9.4
######################################################
# jsoncpp should not be configured & built in the jsoncpp source directory
# You must run cmake in a build directory.
# For example:
# mkdir jsoncpp-Sandbox ; cd jsoncpp-sandbox
# git clone https://github.com/open-source-parsers/jsoncpp.git # or download & unpack the source tarball
# mkdir jsoncpp-build
# this will create the following directory structure
#
# jsoncpp-Sandbox
#  +--jsoncpp
#  +--jsoncpp-build
#
# Then you can proceed to configure and build
# by using the following commands
#
# cd jsoncpp-build
# cmake ../jsoncpp # or ccmake, or cmake-gui
# make
#
# NOTE: Given that you already tried to make an in-source build
#       CMake have already created several files & directories
#       in your source tree. run 'git status' to find them and
#       remove them by doing:
#
#       cd jsoncpp-Sandbox/jsoncpp
#       git clean -n -d
#       git clean -f -d
#       git checkout --
#
######################################################
CMake Error at extern/jsoncpp/include/PreventInSourceBuilds.cmake:41 (message):
  Quitting configuration