Hello gents,
Im running the OTGW using an ai thinker ESP-12 wifi to serial module together with a Remeha Tzerra plus (includes the return water temp) and an Isense Thermostat.
All is working pretty fine I would say but once in a while (2 times a day) I sudden see a whole list is PR: BV in the log. the problem resolves itself but Im wandering what causes this.
The OTGW website of Schelte Bron says: BV - Bad Value. The command contained a data value that is not allowed.
But what does it mean really. Who is sending a data value not allowed? The thermostat, the CH (CV) or the OTGW is mizing things itself.
[Resolved] PR: BV (Bad Value)
Moderator: leecollings
-
- Posts: 60
- Joined: Thursday 08 December 2016 21:07
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Bussum
- Contact:
[Resolved] PR: BV (Bad Value)
Last edited by CaptainSlow on Tuesday 27 October 2020 18:51, edited 1 time in total.
____________________________________________________________________
Raspberry PI 3 Model B with USB stick, Domoticz Stable, OTGW LAN with ESP wifi-bridge and Isense Thermostat using the Outside Temp from Buienradar via Domoticz, Milight Ibox-2(V6)
Raspberry PI 3 Model B with USB stick, Domoticz Stable, OTGW LAN with ESP wifi-bridge and Isense Thermostat using the Outside Temp from Buienradar via Domoticz, Milight Ibox-2(V6)
-
- Posts: 60
- Joined: Thursday 08 December 2016 21:07
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Bussum
- Contact:
[Resolved]:Re: PR: BV (Bad Value)
by accident I loaded the wrong firmware on the OTGW. Now running 4.2.5. No PR: BV anymore.
____________________________________________________________________
Raspberry PI 3 Model B with USB stick, Domoticz Stable, OTGW LAN with ESP wifi-bridge and Isense Thermostat using the Outside Temp from Buienradar via Domoticz, Milight Ibox-2(V6)
Raspberry PI 3 Model B with USB stick, Domoticz Stable, OTGW LAN with ESP wifi-bridge and Isense Thermostat using the Outside Temp from Buienradar via Domoticz, Milight Ibox-2(V6)
Who is online
Users browsing this forum: No registered users and 0 guests