Page 1 of 1
RFXTRX443E and Luxorparts 50969
Posted: Wednesday 02 September 2020 10:00
by osirisguitar
Anyone got Luxorparts 50969 working with RFXTRX433E?
https://www.kjell.com/se/produkter/smar ... ack-p50969
If I activate "Allow new hardware" and press the remote, multiple devices are detected. With PRO1 firmware the logs look like this:
Code: Select all
2020-09-02 09:52:31.504 (RFX433) Lighting 2 ()
2020-09-02 09:52:35.659 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:52:40.056 (RFX433) Lighting 5 ()
2020-09-02 09:52:40.552 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:52:46.037 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:52:49.843 (RFX433) Lighting 2 ()
2020-09-02 09:52:54.494 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:00.106 (RFX433) Lighting 2 ()
2020-09-02 09:53:01.320 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:03.910 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:05.124 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:06.597 (RFX433) Lighting 5 ()
2020-09-02 09:53:06.917 (RFX433) Lighting 2 ()
2020-09-02 09:53:08.146 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:11.104 (RFX433) Lighting 2 (Unknown)
2020-09-02 09:53:12.320 (RFX433) Lighting 2 (Unknown)
In the list of devices it says this:
- domoticz.png (37.46 KiB) Viewed 3381 times
None of the devices work though... I've tried manually adding switches and cycled through pretty much every protocol there is.
I get that they might just not work, but it seems sooo close. The description also says compatible with Nexa, Proove and Telldus...
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 03 September 2020 0:03
by plugge
Hi, they should work according to a post from July 2017
https://www.domoticz.com/forum/viewtopi ... 40#p140107
I don't have these parts.
Maybe send a PM to the author of the message and ask what protocol was used.
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 03 September 2020 9:31
by osirisguitar
Awesome, thanks! I'm usually good att searching, I promise
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 03 September 2020 9:37
by osirisguitar
No wait, he's using an RFLink, I'm using a Rfxtrx...
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 03 September 2020 12:25
by plugge
osirisguitar wrote: ↑Thursday 03 September 2020 9:37
No wait, he's using an RFLink, I'm using a Rfxtrx...
Have you tried ARC (manually) in stead of AC? All my KaKu switches work like that and they seem similar to the Luxoparts 50969.
The setting on the back of the switch (if it has any) is important something like A..P and 1..16, or I..IV, or A 1..3, B 1...3 etc. when registering in RFXcom 433.92
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 03 September 2020 13:36
by osirisguitar
plugge wrote: ↑Thursday 03 September 2020 12:25
osirisguitar wrote: ↑Thursday 03 September 2020 9:37
No wait, he's using an RFLink, I'm using a Rfxtrx...
Have you tried ARC (manually) in stead of AC? All my KaKu switches work like that and they seem similar to the Luxoparts 50969.
The setting on the back of the switch (if it has any) is important something like A..P and 1..16, or I..IV, or A 1..3, B 1...3 etc. when registering in RFXcom 433.92
I've tried every protocol available... Not every permutation of parameters obviously. They're self-learning, no switches.
Right now I'm trying to find some way to monitor raw output of signals received by the rfx to see if I can create an rfxcommand out of what the remote is sending. Rfxmngr can do it allegedly, but since I'm running Domoticz on a raspberry I'm not super keen on setting up a windows machine for that specifically...
Re: RFXTRX443E and Luxorparts 50969
Posted: Monday 07 September 2020 16:46
by plugge
osirisguitar wrote: ↑Thursday 03 September 2020 13:36
Right now I'm trying to find some way to monitor raw output of signals received by the rfx to see if I can create an rfxcommand out of what the remote is sending. Rfxmngr can do it allegedly, but since I'm running Domoticz on a raspberry I'm not super keen on setting up a windows machine for that specifically...
Maybe via linux socat (see:
https://guv.cloud/post/rfxmngr-and-hass ... anagement/)
And here there seems to be a solution for socat on RPi
https://www.linuxquestions.org/question ... 175644811/
Re: RFXTRX443E and Luxorparts 50969
Posted: Tuesday 08 September 2020 16:20
by osirisguitar
Excellent find, going to try it out!
Re: RFXTRX443E and Luxorparts 50969
Posted: Wednesday 09 September 2020 13:35
by osirisguitar
I can say right away that socat is available for RPi via apt. So no need to scavenge the internet for a static binary. Haven't actually tested tunneling the RFX yet though.
Re: RFXTRX443E and Luxorparts 50969
Posted: Tuesday 29 September 2020 22:45
by plugge
osirisguitar wrote: ↑Wednesday 09 September 2020 13:35
Haven't actually tested tunneling the RFX yet though.
Did you manage to get it working?
Re: RFXTRX443E and Luxorparts 50969
Posted: Thursday 08 October 2020 14:07
by osirisguitar
Didn't actually try yet, I got sidetracked by another home automation project
. Will report back later.
Re: RFXTRX443E and Luxorparts 50969
Posted: Friday 09 October 2020 11:42
by Bernd
Maybe @b_weijenberg can help? He is the developer of the RFXTRX443-series. You can send him a pm.....