Domoticz

Code: Select all

2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR BINARY, Label: Sensor, Instance: 1, Index: 0
2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Air Temperature, Instance: 1, Index: 1
2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: General Purpose, Instance: 1, Index: 2
2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Illuminance, Instance: 1, Index: 3
2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Humidity, Instance: 1, Index: 5
2020-07-13 10:49:10.804 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Carbon Dioxide, Instance: 1, Index: 17
2020-07-13 10:49:10.805 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Loudness, Instance: 1, Index: 30
2020-07-13 10:49:10.805 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Particulate Matter 2.5, Instance: 1, Index: 35
2020-07-13 10:49:10.805 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Volatile Organic Compound, Instance: 1, Index: 39
2020-07-13 10:49:10.805 OpenZWave: Value_Added: Node: 50 (0x32), CommandClass: SENSOR MULTILEVEL, Label: Smoke Density, Instance: 1, Index: 55
2020-07-13 10:49:10.057 Status: OpenZWave: ManufacturerSpecificDB Ready

Code: Select all

return {
   on = {
      devices = {
         'Air Quality'   -- default name from A8-9
      }
   },

   execute = function(domoticz, device)
      if device.co2 > 64 then
            domoticz.devices(110).update( 0, device.co2 )   -- 'Woonkamer-CO2'
      end
   end
}

Code: Select all

still testing

Code: Select all

*/5 * * * * 	/volume0/usr/builtin/bin/php /volume1/cron/05min/taskZwave05.php

Code: Select all

# Script_device_pir.lua

local motion_detector = '$Motion sensor'
local motion_detector_device = 'MOUVEMENT'
local debug = 'On'

------------------------------------------------------------------------------
-- Déclaration des fonctions

commandArray = {}
	
	if (devicechanged[motion_detector]) then

		detect = tonumber(otherdevices_svalues[motion_detector])
		-- print (''..detect..'')
		
		if ( detect == 1.0 )	then
			commandArray[motion_detector_device] = 'On'
			if (debug == 'On') then print ('# MOUVEMENT : Détecteur '..motion_detector_device..' mis à On') end
		end
		
		
		if ( detect == 0.0 ) then
			commandArray[motion_detector_device] = 'Off' 
			if (debug == 'On') then print ('# MOUVEMENT : Détecteur '..motion_detector_device..' mis à Off') end
		end
		if (debug == 'On') then print ('# MOUVEMENT : Fin du script') end
	end
	
return commandArray

Code: Select all

<?php
# ==========================================================
# Bron: http://192.168.1.11:9980/ozwcp/poll.xml
#
  $versie = '1.06 dd 10-08-2021';
#
# Doel: Domotics V2021.1 database
# Via : json.htm?type=command&param=udevice&idx=107&nvalue=0&svalue=
# ==========================================================

header('Content-Type: application/json');
date_default_timezone_set("Europe/Amsterdam");

ini_set('max_execution_time', 90 );  // seconds
ini_set('memory_limit', '512M');

$url = 'http://192.168.1.11:9980/ozwcp/poll.xml';
$sensors = ['Schemerlampjes','Boiler','Hal','Woonkamer'];
$result = json_encode( ['error' => 'time out...'] );
$teller = 0;
$run = true;

while ($teller < 5) {

	$tel = 0;
	while ($run) {

		$resultStr = file_get_contents($url);
		// splitsen in apparaten
		preg_match_all('#<node (.*?)</node>#si', $resultStr, $matches);

		if ( count($matches[0]) == count($sensors) ) {

			// voor ieder apparaat
			foreach($matches[0] as $match){
				
				if ( strpos($match, 'Woonkamer') && strpos($match, 'Volatile Organic Compound')) {

					preg_match('#label="Volatile Organic Compound" units="Ppm" readonly="true" polled="false">(.*?)<help>Volatile Organic Compound Sensor Value</help>#si', $resultStr, $voc);
					// ppm -> ppb
					$value = $voc[1] * 1000;

					if ($value < 0) {
						exit( json_encode( ['error' => 'value < 0, waarde is ' . $value] ) );
					} else {
						$url = "http://192.168.1.11:9980/json.htm?type=command&param=udevice&idx=107&nvalue=0&svalue=" . $value;
						$result = file_get_contents($url);
						$jsonArray = json_decode($result, true);
						if ($jsonArray['status'] == 'OK') {
							exit( $result );
						}
					}

				}

			}

			$tel = 100;
		}

		$run = $tel++ < 5;

		// sleep before running the loop again
		usleep(500);
	}

	sleep(10);
	$teller++;
}
echo $result;
?>