2x Aeotec Z-stick Gen5 on single PI with Domoticz
Posted: Tuesday 21 April 2020 14:17
Is it possible to have 2 Aeotec Z-sticks Gen5 connected to Raspberry PI with Domoticz installed on it?
One would be the EU version (ZW090-C: EU frequency - already in place) and the other one the US version (ZW090-A: US Frequency - to be purchased).
Reason of different frequencies needed is installation of US format glass plate touch panel Z-wave switches (via AliExpress) but in the size I need them to replace current analog BTicino wall switches (and be sure the fill the wholes in my walls
required size is 120mm by 74mm (approx.)
example: https://www.aliexpress.com/item/3300237 ... 6731Z7XjcU
One would be the EU version (ZW090-C: EU frequency - already in place) and the other one the US version (ZW090-A: US Frequency - to be purchased).
Reason of different frequencies needed is installation of US format glass plate touch panel Z-wave switches (via AliExpress) but in the size I need them to replace current analog BTicino wall switches (and be sure the fill the wholes in my walls
required size is 120mm by 74mm (approx.)
example: https://www.aliexpress.com/item/3300237 ... 6731Z7XjcU