Domoticz

I have a Domoticz running on a RP with a 433mHz and a CC2531 connected.

I have 8 Xiaomi Aqara temperature (WSDCGQ11LM) and 4 Ikea IKEA TRADFRI LED (LED1836G9) connected without problems.

But I can get my IKEA TRADFRI ON/OFF switch (E1743) working

when pairing, I get the following messages:

zigbee2mqtt log
{"ieeeAddr":"0x14b457fffe7b9f24","networkAddress":45484,"friendly_name":"0x14b457fffe7b9f24","lastSeen":1575290893017}]}'
info 2019-12-02T12:48:34: Successfully interviewed '0x14b457fffe7b9f24', device has successfully been paired
info 2019-12-02T12:48:34: Device '0x14b457fffe7b9f24' is supported, identified as: IKEA TRADFRI ON/OFF switch (E1743)
info 2019-12-02T12:48:34: MQTT publish: topic 'zigbee2mqtt/bridge/log', payload '{"type":"pairing","message":"interview_successful","meta":{"friendly_name":"0x14b457fffe7b9f24","model":"E1743","vendor":"IKEA","description":"TRADFRI ON/OFF switch","supported":true}}'

but form Domoticz log

2019-12-02 13:53:51.071 (Zigbee2Mqtt) Device 0x14b457fffe7b9f24 (0x14b457fffe7b9f24) doesn't have "model" attribute, skipped

In Domoticz under Devices I can see the the E1743 is correclty paired but i receive only battery and linkquality.

And when I click the device I don't get any responce. not in Domoticz's log or zigbee2mqtt log

Is there anyone who can help to get it work

Solved

Blukacz wrote: ↑Friday 24 January 2020 13:28Solved

I want to know how you solved it, i have the same problem......
Tnx in advanced, i spend now already 3 nights try to solved it

grts Rene