New to Tasmota / MQTT

[Draakje]

Hi All,

Today I have connected a Sonoff Pow R2 flashed with Tasmota to my Domoticz.

All seems ok but I do have a question.

I can switch on/off without any problems and I do see updated values for the Voltages. But the updates for Amps and Watts (kWh meter) are not updated regularly.

I have set the update timer to 10 secs and I can see that the switch status is reported every 10 seconds. But why are the other counters not updated?

---- log file from Sonoff--
00:00:11 MQT: domoticz/in = {"idx":92,"nvalue":0,"svalue":"0;14.7","Battery":100,"RSSI":8}
00:00:12 MQT: domoticz/in = {"idx":93,"nvalue":0,"svalue":"232","Battery":100,"RSSI":8}
00:00:12 MQT: domoticz/in = {"idx":94,"nvalue":0,"svalue":"0.000","Battery":100,"RSSI":8}
00:00:12 MQT: tele/sonoff_Pow1/SENSOR = {"Time":"1970-01-01T00:00:11","ENERGY":{"TotalStartTime":"2019-12-07T22:37:02","Total":0.015,"Yesterday":0.000,"Today":0.015,"Period":0,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Voltage":232,"Current":0.000}}
00:00:19 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}
00:00:29 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}
00:00:39 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}
00:00:49 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}
00:00:59 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}
00:01:09 MQT: domoticz/in = {"idx":91,"nvalue":1,"svalue":"","Battery":100,"RSSI":8}

Any help is appreciated