WebServer:8080 thread seems to have ended
Posted: Sunday 12 May 2019 14:53
Domoticz V4.10734
Build Hash: 3ac5b237
Build Date: 2019-05-12 08:06:25
Running on a RPI 3B
Additional HW:
- RFLink (USB persistent)
- ZWave stick (USB persistent)
After every update, I get this message sequence:
2019-05-12 14:41:14.544 (AeonUSB) General/Thermostat Clock (Switch-1Clock)
2019-05-12 14:41:14.075 Status: Python EventSystem: Initalizing event module.
2019-05-12 14:41:14.075 Status: EventSystem: Started
2019-05-12 14:41:14.075 Status: EventSystem: Queue thread started...
2019-05-12 14:41:14.090 Status: PluginSystem: Entering work loop.
2019-05-12 14:41:14.269 Status: OpenZWave: using config in: /home/pi/domoticz/Config/
2019-05-12 14:41:14.271 Status: OpenZWave: Starting...
2019-05-12 14:41:14.271 Status: OpenZWave: Version: 1.4-3335-g74e05982-dirty
2019-05-12 14:41:14.508 Status: OpenZWave: Driver Ready
2019-05-12 14:41:14.768 Status: MQTT: Connecting to -------:1883
2019-05-12 14:41:14.871 Status: MQTT: connected to: -------:1883
2019-05-12 14:41:14.886 Status: RFLink: Controller Initialized!...
2019-05-12 14:41:14.961 Status: RFLink Detected, Version: 1.1 Revision: 48 Build: 4
2019-05-12 14:41:14.972 Status: MQTT: Subscribed
2019-05-12 14:42:22.088 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 71.000000 seconds ago)
2019-05-12 14:42:36.091 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 85.000000 seconds ago)
2019-05-12 14:42:50.093 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 99.000000 seconds ago)
2019-05-12 14:43:04.096 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 113.000000 seconds ago)
2019-05-12 14:43:18.099 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 127.000000 seconds ago)
2019-05-12 14:43:32.101 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 141.000000 seconds ago)
The only way to get any further to to shutdown and boot the RPI.
I realy could use some help here.
Build Hash: 3ac5b237
Build Date: 2019-05-12 08:06:25
Running on a RPI 3B
Additional HW:
- RFLink (USB persistent)
- ZWave stick (USB persistent)
After every update, I get this message sequence:
2019-05-12 14:41:14.544 (AeonUSB) General/Thermostat Clock (Switch-1Clock)
2019-05-12 14:41:14.075 Status: Python EventSystem: Initalizing event module.
2019-05-12 14:41:14.075 Status: EventSystem: Started
2019-05-12 14:41:14.075 Status: EventSystem: Queue thread started...
2019-05-12 14:41:14.090 Status: PluginSystem: Entering work loop.
2019-05-12 14:41:14.269 Status: OpenZWave: using config in: /home/pi/domoticz/Config/
2019-05-12 14:41:14.271 Status: OpenZWave: Starting...
2019-05-12 14:41:14.271 Status: OpenZWave: Version: 1.4-3335-g74e05982-dirty
2019-05-12 14:41:14.508 Status: OpenZWave: Driver Ready
2019-05-12 14:41:14.768 Status: MQTT: Connecting to -------:1883
2019-05-12 14:41:14.871 Status: MQTT: connected to: -------:1883
2019-05-12 14:41:14.886 Status: RFLink: Controller Initialized!...
2019-05-12 14:41:14.961 Status: RFLink Detected, Version: 1.1 Revision: 48 Build: 4
2019-05-12 14:41:14.972 Status: MQTT: Subscribed
2019-05-12 14:42:22.088 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 71.000000 seconds ago)
2019-05-12 14:42:36.091 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 85.000000 seconds ago)
2019-05-12 14:42:50.093 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 99.000000 seconds ago)
2019-05-12 14:43:04.096 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 113.000000 seconds ago)
2019-05-12 14:43:18.099 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 127.000000 seconds ago)
2019-05-12 14:43:32.101 Error: WebServer:8080 thread seems to have ended unexpectedly (last update 141.000000 seconds ago)
The only way to get any further to to shutdown and boot the RPI.
I realy could use some help here.