Domoticz

Hi,

I'd like to know if there's a way to determine which Z-Wave devices (connected to Aeotec Z-Wave stick, on Raspberry Pi) act as extenders.

I've got a few of the Aeotec Multisensors, which should be capable of acting as repeaters. But my suspicion is that at least one (the critical one as it turns out) may not be performing that function at the moment.

I'm running version: 4.9700 of Domoticz on Raspberry Pi.

Generally you can state the battery powered devices are never capable of acting as extenders and devices powered by the grid are capable of acting as extenders.