Page 1 of 1
433 Mhz temperature sensor
Posted: Tuesday 13 November 2018 17:54
by Pete48
What is the best wireless temperature sensor to SAUNA ? And will work with RfxCom...
Thanks
Pete
Re: 433 Mhz temperature sensor
Posted: Tuesday 13 November 2018 19:47
by b_weijenberg
The Prego P-8426 is supported but unknown if this sensor is still available.
The Maverick ET732 or ET733 BBQ sensor can be used.
Re: 433 Mhz temperature sensor
Posted: Tuesday 13 November 2018 21:46
by niki_lauda
Pete48 wrote: ↑Tuesday 13 November 2018 17:54
What is the best wireless temperature sensor to SAUNA ? And will work with RfxCom...
Thanks
Pete
I use this one.
https://www.weerstationkopen.nl/accesso ... atersensor
Re: 433 Mhz temperature sensor
Posted: Wednesday 14 November 2018 17:54
by Pete48
Thats to water?? But does it really work fine in the air? And it can show up to 90 degrees celsius ?
Pete
Re: 433 Mhz temperature sensor
Posted: Sunday 24 February 2019 10:47
by johansson
b_weijenberg wrote: ↑Tuesday 13 November 2018 19:47
The Prego P-8426 is supported but unknown if this sensor is still available.
The Maverick ET732 or ET733 BBQ sensor can be used.
The Prego seems to be unavailable, so I tried something similar from local DIY store:
Motonet link. This was prooved to work with e.g. Cozify, but could not get it working with RFXcom. Any ideas how to add support into this as well?
Re: 433 Mhz temperature sensor
Posted: Sunday 24 February 2019 13:12
by b_weijenberg
@johansson: contact support rfxcom.com
Re: 433 Mhz temperature sensor
Posted: Sunday 24 February 2019 13:36
by johansson
Re: 433 Mhz temperature sensor
Posted: Sunday 24 February 2019 17:20
by johansson
Message through rfxcom.com sent. The model I got seems to be Prego P8426B.
