Domoticz

I have upgraded my RFXcom to th XL version, and Domoticz to the latest stable. I amongst others use it to control a Westinghouse fan. Since a few weeks I am not able to control the fan anymore. I used to use the Lucci air AC controls for it. Now apparently something has changed, either on RFX side or on Domoticz. When I use RFXmgr, I see the protocol is now Westinghouse:

================================================
17-10-2018 08:30:34:921= Fan command
================================================
Packettype = Fan
subtype = Westinghouse
subtype = Westinghouse
Sequence nbr = 13
ID = SW1=Off, SW2=Off, SW3=Off, SW4=Off
Command = OFF
Signal level = +9 dBm
------------------------------------------------

However, I am not able to select Westinghouse as an option from the dropdown box in the switches view. Anybody encountering the same problem?

Regards,
Erwin

Hi,

Did you find anything regarding your problem please ? I have bought a 7815840 WestingHouse Turbo Swirl Fan, I'm having RFXCom 433trxE with firmware Ext2/1025 and Domoticz 11291 but I don't know how to control it through Domoticz :/

Thanks for any advices/informations.

Regards,

Laurent

Old post, but did you get it working?

I'm using a Westinghouse fan with a 77641B remote. I can add it through 'manually switch/light' button and then fill in the information. But, for the ID, it only has 3 boxes, where I have 4 (on/off) switches in the remote.
I have all 4 of them in the down position. But if I fill in '0' as ID (or any other number) it doesn't want to work.

What do I have to fill in here?

In the log I see: '2020-07-04 13:05:48.279 subtype = Wrong command received from application (0)'

Just got a Windows computer/laptop to see what happens when i used the RFXcom manager.

I don't understand .... about it.

===============================================
11-2-2021 12:36:43:241= Fan command: 08 17 04 0F 00 00 01 02 00
================================================
Packettype = Fan
subtype = Westinghouse
subtype = Westinghouse
Sequence nbr = 15
ID = SW1=Off, SW2=Off, SW3=Off, SW4=On
Command = MED
Signal level = +10 dBm
------------------------------------------------
11-2-2021 12:36:43:718= 0402010F00
Packettype = Receiver/Transmitter Message
subtype = Transmitter Response
Sequence nbr = 15
response = ACK, data correct transmitted

Been searching this on and off for about 6 months now, and still am nowhere close to finding an answer. Is it not possible to use this fan?

So, it does look there is no way to add this fan/remote to Domotic.