Page 1 of 1
enable http fetching
Posted: Wednesday 20 June 2018 22:35
by Lebo2d9
Hi,
I think i'm missing somenthing.
How can i enable "http fetching"?.
Can someone help me out?
Thanks
Re: enable http fetching
Posted: Wednesday 20 June 2018 23:39
by waaren
goto [SETUP] [SETTINGS]===>> LOCAL NETWORKS (NO USERNAME/PASSWORD)
and enter 127.0.0.*;
this will allow dzVents to get information from/via domoticz
Re: enable http fetching
Posted: Thursday 21 June 2018 0:21
by Lebo2d9
Hi Waaren,
I have 127.0.0.1 in local networks.
I'me trying the "check dead devices.lua" script but noting is working.
Re: enable http fetching
Posted: Thursday 21 June 2018 7:35
by waaren
@Lebo2d9,
if you want forum members to help, you will need to give more info. To start with:
show the complete script
what do you see in the domoticz log
are other scripts working
Re: enable http fetching
Posted: Sunday 24 June 2018 21:35
by Lebo2d9
Today i switched to strech and installed the new stable version. The dzVents dead device detection is working now. Now i have a problem with 1wire. Trouble shooting for that is for an other day.
Kind regards
Koen
Verstuurd vanaf mijn SM-G955F met Tapatalk
Re: enable http fetching
Posted: Sunday 24 June 2018 23:15
by Lebo2d9
Hi,
After adding "dtoverlay=w1-gpio,gpiopin=4" to /boot/config.txt the 1wire was working back again.