Domoticz

Hi,

Windows here, running beta 3.9268.

I manage to install the plugin as it finds my Onkyo TX-NR609, but no devices are created in Devices list!?

Here is some log "XML file does not yet exist" ?

2018-04-23 20:07:38.939 (Onkyo) Pushing 'onHeartbeatCallback' on to queue
2018-04-23 20:07:38.955 (Onkyo) Processing 'onHeartbeatCallback' message
2018-04-23 20:07:38.955 (Onkyo) Calling message handler 'onHeartbeat'.
2018-04-23 20:07:38.955 (Onkyo) onHeartbeat called
2018-04-23 20:07:38.955 (Onkyo) Loading XML from file
2018-04-23 20:07:38.955 (Onkyo) Pushing 'WriteDirective' on to queue
2018-04-23 20:07:38.955 (Onkyo) XML file does not yet exist
2018-04-23 20:07:38.955 (Onkyo) Processing 'WriteDirective' message
2018-04-23 20:07:38.955 (Onkyo) Sending 27 bytes of data
2018-04-23 20:07:38.955 (Onkyo) 49 53 43 50 00 00 00 10 00 00 00 0a 01 00 00 00 21 31 4e 52 ISCP............!1NR
2018-04-23 20:07:38.955 (Onkyo) 49 51 53 54 4e 0d 0a .. .. .. .. .. .. .. .. .. .. .. .. .. IQSTN..

Thanks!

Do you have "Accept new hardware" enabled?
As far as i know devices are being created when you use the on the receiver, so after accepting new hardware, changing volume should create the volume device in Domoticz.

Hi,

thanks yes I have "accept new hardware" enabled, I did turn off the windows firewall as well. And I also did turn off and on the receiver, changed volume etc. still no Onky devices...

Now at least I got the following error in the log:

2018-04-24 22:47:38.900 Error: (Onkyo) 'onMessage' failed 'TypeError':'onMessage() missing 2 required positional arguments: 'Status' and 'Extra' '.

Any clue?