Domoticz

Hi,

First, as my english is not perfect, please be cool with me! :p

I own a Chuango SPS-260 siren.

I don't manage to appair it with Domoticz, which works with Raspberry PI3 and RF link.

This device as a learning button. When activated, it wait for a commande to appair with.

I found the on and off commands on the internet, i managed to activate the siren by using rf loader.

I tried to create a rf link device in domoticz. I entered command and the siren reacted to this. Domoticz said i should find de new device in device list, but i didn't.

I'm stuck at this point. Can someone help me?

Commands are :

On : 10;ev1527;000080;2;ON;
Off : 10;ev1527;000080;1;ON;

I tried to appair it with a Chacon remote (using one off 16 chanels), and in the same time using dectection mod in domticz.

Looks like it works.

I'll test it tomorrow as it's sunday and my neighbors have the right to be quite! :p

Could be interessent to put this signal into domoticz in order to appair this kind of devices.

If it does not work, try using the RFFind learning option.

I tested it. It works to put it on, but i can't stop it. Using the remote or domoticz.

I'm sorry but i don't understand what RRF learning option is... :/

[EDIT] I've found it in FAQ!

But i'm not sure it will be useful as RFlink and Domoticz know the Chacon's remote.

I think the problem is that Domoticz don't create a switch even if i put the correct command (see my first post).

If i misunderstood, let me know. I'm not a programmer, but i'll do my best to help RFlink and Domoticz to progress!

I tryed to do with my remote, it gave this :

10;rffind=on;
20;03;RFFIND=ON;
20;04;TriState;ID=08a2aa;SWITCH=2;CMD=ON;
20;06;TriState;ID=08a2aa;SWITCH=2;CMD=OFF;

But as i said, Off commande don't works

But this one yes (send with RFloader) :

off : 10;ev1527;000080;1;ON;
on : 10;ev1527;000080;2;ON;

As Domoticz should and says have create a device, but don't, is it a possible bug?

If yes, let me know how to mention it.

[EDIT]I've found : http://www.domoticz.com/forum/viewtopic.php?f=6&t=22492

Learning commands to Domoticz works with the 20;... commands.. it can not use the 10;... commands