Domoticz

Hello,

My raspberry isn't starting when the rflink is connected.
When i first start my raspberrry, and after a minute connected the rflink there is no problem.

On my old raspberry i did not hat that problem.

Mark

Mark,

First thing I can think of is an power issue.. You upgrade to a newer raspberry but this one is consuming more power.

Please try a better power supply as a test?

Good luck

Frank

freijn wrote: Saturday 17 February 2018 21:39 Mark,

First thing I can think of is an power issue.. You upgrade to a newer raspberry but this one is consuming more power.

Please try a better power supply as a test?

Good luck

Frank

Problem still the same.

Mark

ok,

back to basic if you connect a HMDI screen.. does it show anything? What is the definition of not starting?

Similar here... When I boot with RF-link connected I have not one Z-wave device showing up... When I unplug the RF-link and boot..all Z-wave devices are showing..after that plug the RF-link in and everything is ok... i can live with that, but its not ideal... specially when the RPI needs a reboot and I am not home...

Cheers, Hans

Did you make the USB slots persistent?

Stuntteam wrote: Thursday 22 February 2018 20:26 Did you make the USB slots persistent?

What do you mean with that?

Mark

marktn wrote: Saturday 24 February 2018 14:57

Stuntteam wrote: Thursday 22 February 2018 20:26 Did you make the USB slots persistent?

What do you mean with that?

Mark

Google for "Raspberry USB persistence" or got to https://www.domoticz.com/wiki/PersistentUSBDevices

Google for "Raspberry USB persistence" or got to https://www.domoticz.com/wiki/PersistentUSBDevices

Is see in the wiki mult device's but not a rflink? Or are the RFX-433 settings the same?

He wrote that after the Raspberry is started and reconnect its working. So to my understanding nothing with persistence, I am still thinking its power.

Or, is connecting the USB after power-up resolving/overrule the perstence issue? Please help me understand..

Frank

freijn wrote: Saturday 24 February 2018 20:50 He wrote that after the Raspberry is started and reconnect its working. So to my understanding nothing with persistence, I am still thinking its power.

Or, is connecting the USB after power-up resolving/overrule the perstence issue? Please help me understand..

Frank

To make it work. First i start the raspberry. After a minute i connect the rflink.
I am using only a RFlink on my raspberry
Already changed the power.

Mark

Did you also try a different USB cable?

No i didn't. But i made a test, same problem.

Also tried another hardware, my old Nodo. Same problem.