Domoticz

Hi guys

Is NEO COOLCAM NAS-WR01ZE working well on Domoticz? I found them on Ali for US $23.70 incl shipping.

I'd like to watch my new air compressor. In case the compressor is working for too long time (determined by power usage reported by the plug) I'd like to break the power to it.

I can fully recommend them!
But 23 bucks is way to much, have a look at Gearbest: https://www.gearbest.com/home-gadgets/pp_581312.html
They are in sale like every week, e.g. today for 16.23€


I'm using 10 at the moment and 3 more are waiting for integration.

I'm interested but it also tracks consumption?

Yes, Watt, Volt, Ampere and kWh.
Also Alarm Devices if the consumption is higher than the configured levels.

Yes, and works perfectly.

Delfí

blacksn0w wrote: ↑Wednesday 22 November 2017 15:21 I can fully recommend them!
But 23 bucks is way to much, have a look at Gearbest: https://www.gearbest.com/home-gadgets/pp_581312.html
They are in sale like every week, e.g. today for 16.23€


I'm using 10 at the moment and 3 more are waiting for integration.

Thank you very much!

On the website www.tomtop.com it's cheaper!!!

Hi guys

I'm interested to use this opportunity, which interphase have you used for the connection with domoticz?

Aeon Labs Aeotec Gen 5 Z-Wave USB Interface on batteries ??

https://www.sossolutions.nl/aeon-labs-a ... batterijen

Thanks for the help

Cobra045

SW: Domoticz beta: V3.9052
Build Hash: 927ba005
Build Date: 2018-03-18 09:38:55
HW: Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway
HW: Raspi2

When first and only node operated, it was all fine. When introduced +1 Zwave plug, then started some bogus readings.
+Enabled polling.
+Power conso reporting 3%
+Delay 30sec.
-Didnt really help, will need to embrace myself and so exclude all, reinclude all.
Also, can be related to this Domoticz error. as there is a gap in zwave logs

==> user.log <==
Mar 20 08:53:49 domoticz: Warning: Notification NOT handled (type: F3 - General, subtype: 28 - Counter Incremental), please report on GitHub!
Mar 20 08:53:49 domoticz: Warning: Notification NOT handled (type: F3 - General, subtype: 28 - Counter Incremental), please report on GitHub!

==> messages <==
Mar 20 08:53:52 domoticz: Warning: Notification NOT handled (type: F3 - General, subtype: 28 - Counter Incremental), please report on GitHub!

==> syslog <==
Mar 20 08:53:52 domoticz: Warning: Notification NOT handled (type: F3 - General, subtype: 28 - Counter Incremental), please report on GitHub!

==> user.log <==
Mar 20 08:53:52 domoticz: Warning: Notification NOT handled (type: F3 - General, subtype: 28 - Counter Incremental), please report on GitHub!

Mar 20 08:53:56 domoticz: (zwave) General/kWh (kWh Meter Gas Boiler)
2018-03-20 08:53:44.777 Detail, Node006, Notification: Notification - TimeOut
2018-03-20 08:53:54.126 Detail, Node006, Received: 0x**, 0x**, 0x**, 0x0*, 0x00, 0x**, 0x**, 0x**, 0x02, 0x**, 0x**, 0**0, 0x00, 0x01, 0x**, 0x00, 0x15, 0x00, 0x00, 0x01, 0xc3, 0xa7
2018-03-20 08:53:54.126 Detail,

I just bought this plug but can't get it working : https://www.domoticz.com/forum/viewtopic.php?t=26639