Page 1 of 1
Log With Teleinfo ESB
Posted: Wednesday 30 August 2017 14:54
by Gadupont
Hello,
I have a Module Téléinfo USB - Cartelectronic USBTICLC-WIN.
The teleinfo module writed full logs. Is it possible to configure to have less logs from this module?
Thxs
Re: Log With Teleinfo ESB
Posted: Monday 06 April 2020 18:29
by D3ni3d
Bonjour, hello !
I up this topic as it would be greatly appreciated ...
Logs are full fo those lines :
2020-04-06 18:22:56.245 (edf) General/kWh (Teleinfo kWh Heures Creuses)
2020-04-06 18:22:56.255 (edf) General/kWh (Teleinfo kWh Heures Pleines)
2020-04-06 18:22:56.264 (edf) P1 Smart Meter (Teleinfo kWh Total)
2020-04-06 18:22:56.273 (edf) Current (Teleinfo Courant)
2020-04-06 18:22:56.277 (edf) General/Percentage (Teleinfo Pourcentage de Charge)
2020-04-06 18:22:59.688 (edf) General/kWh (Teleinfo kWh Heures Creuses)
2020-04-06 18:22:59.698 (edf) General/kWh (Teleinfo kWh Heures Pleines)
2020-04-06 18:22:59.707 (edf) P1 Smart Meter (Teleinfo kWh Total)
It could be useful for debug, but daily, there is no real utility as it full the logs ....
It could possible just to add an option "LOG / Dont' LOG"
Thanks in advance, and many thanks again for Domoticz
