Domoticz

Posted: **Friday 17 March 2017 17:55**

Today I received a smart meter, so its immediately connected to Domoticz. However, I notice that wit RFX, Zwave and P1 (and some more) on 1 Domoticz Pi it is simply not working together. So, I installed a separate Pi for the P1 meter.

But now, when I connect it as a slave to my master Domoticz, it connects, but the meter is never showing up. Is there a way to push the meter from the slave to the master?

Posted: **Friday 17 March 2017 21:23**

Duh. You have to assign rights to a specific user.

Posted: **Friday 17 March 2017 23:06**

Setup a new user on the slave device (setup->More Options->Edit Users
After user is created select -> Set Devices
Click in the left panel,the devices you need (most likely Gas and Meter) -> Save
On the master add the remote pi as new hardware ip:xxx.xxx.xxx.xxx:6144
Items should now appear on the master pi

Domoticz

P1 Meter on a different Domoticz Server

P1 Meter on a different Domoticz Server

Re: P1 Meter on a different Domoticz Server

Re: P1 Meter on a different Domoticz Server