Page 1 of 1

Itead Sonoff 2.4ghz wi-fi wall switch compatibility ?

Posted: Thursday 02 March 2017 20:18
by tontze
Hi all !

Tried using search, but no hits. Has anyone tried these :

https://www.aliexpress.com/item/Sonoff- ... 271.Qd5CG6

Looks nice and are affordable, but i wonder do these work out of the box ? As far as i have understood, they dont need different controller, can be controlled directly from mobile phone for example.

-Tomi

Re: Itead Sonoff 2.4ghz wi-fi wall switch compatibility ?

Posted: Thursday 09 March 2017 16:36
by tontze
Found some information about the switch :

"It's an ESP8266 based, PSF-A85 mounted on a small board that has 4 pin header labeled 3.3v, GND, and Relay (4th pin unused). In addition to the ESP module, there's a touch sensor chip (label scrapped off). The larger board has power and relay"

https://github.com/arendst/Sonoff-MQTT-OTA-Arduino

Looks nice :D

Re: Itead Sonoff 2.4ghz wi-fi wall switch compatibility ?

Posted: Sunday 26 March 2017 19:49
by tontze

Re: Itead Sonoff 2.4ghz wi-fi wall switch compatibility ?

Posted: Sunday 26 March 2017 22:15
by woodtrix
I have one lying around, on my to do list, but haven't got time to figure out how to open it...

https://github.com/davidmpye/Sonoff-Touch-MQTT/wiki

Re: Itead Sonoff 2.4ghz wi-fi wall switch compatibility ?

Posted: Wednesday 03 May 2017 6:49
by tontze
Ok, there is information how to do it here :
https://www.domoticz.com/forum/viewtopi ... 28&t=17352